15-Jan-2016, 23:48
(15-Jan-2016, 22:39)Phantom kid Wrote:(11-Jan-2016, 16:18)Johnnydev Wrote: How to reset Phantom and Dialog?
Olivier 08/26/2015
Sometime it might be required to reset your system Phantom and Dialog. For making your reset on the more efficient way please follow the below instructions:
Check if your Dialog is connected to your Internet router (via an ethernet cable)
Check if the device you will use for Spark is on the correct Wifi network
Unplug your Dialog and Phantom from the electric outlet
Wait 30 secondes
Plug back your Dialog (first) and your Phantom(s)
Wait 30 secondes
Press 3 times quickly the bouton on the back of your Dialog (3 short press, the light of your Dialog will react for informing that the reset is starting)
Wait until your Dialog light stops blinking (it means end of the reset for your Dialog)
Press 3 times the back button of your Phantom (3 short press)
Wait about a minute until you hear the start sound of your Phantom(s) (if Phantom is not editing any sounds during 5 seconds, then please redo the steps 3, 4, 5, 6, 9 and 10 without touching your Dialog)
Launch Spark and follow instructions for making the setup
Note: If during the step 11, Spark is asking you to plug your Dialog, it means that your Dialog is not correctly connected to your router, or the device you are using with Spark is not connected to the right Wifi network.
Hey thanks for the suggestion but
Still not auto switching after reset. The wierd thing is when optical is selected already in spark, you must then tap it once more to get sound to play.
Devialet support have been rubbish and haven't come back to me despite four requests and a support ticket. Be warned phantom prospective purchasers! These are great speakers but the software is being beta tested by the customers!
Anyone else have these issues?
No absolutly nothing
