Roon - the next step?

[cereal killer]

Hi - yes no worries. It’s a really neat simple setup. NAS spec is:
QNAP TS-251+ with 1x8GB Samsung RAM module
2x 1TB sandisk Ultra II SSDs
RoonServer is available from the QNAP ap store.

The NAS and 220 Pro are both hardwired via CAT 7 Ethernet cables to a TP-Link VR900 router.

Everything was virtually plug and play once assembled.
In the QNAP OS I have fixed the IP address for the server then mapped the drive on my laptop.
When I want to add new music I copy it to the NAS via WiFi as it’s all gigabit or A/C rated.
Roon then automatically catalogues and displays new music, laptop can be put away again.

Huummmmm... that´s probably my solution, CK.
If you don´t mind, i´ve just more a couple of questions:
Have you the NAS in the system same room? What about the fan noise and if not, can i connect to another room using my houde network (not all CAT 7, for sure...) without SQ loss. Finally, that NAS model is pretty current in your opinion, and the one to buy considering the target.
Thanks a lot.

Yes thats cool, happy to help

NAS and router sit about 30-50cm away from the 220 pro. 
The amps in the left hand side of a 130cm wide media unit, the NAS and router are in the right hand side with the router to the right of the NAS. TV on top of the unit with optical out into the amp.
I have a 1m Postta (flat) CAT 7 cable between amp and router and 0.5m Postta (flat) CAT 7 cable between the NAS and router........ plus a 1.5m (standard) CAT6 cable from router to TV. 
Even though having a fan the NAS is completely silent from about 10cm away, once fully booted up and the 'smart fan' which runs at about 1000rpm comes online..... The SSDs are obviously silent

IMHO a powerful NAS with 8GB of RAM, 2x 1TB SSDs and a Quad Core Intel processor running at speeds of upto 2.4Ghz deserves a fan just incase somethings plays up.