[attachment=1095 Wrote:Zorbon pid='38687' dateline='1460165719']Snip, snip....Hello - Are you using the digital cable supplied by Devialet when you purchased the D400? Do you have another cable you could try instead?
My power is conditioned by PS Audio Quintet. After turning on the Quintet, I push the button on for dev1, master, it comes on displays 400 and Master. No activity on dev2. When I push the button on dev2, slave, it comes on displays s1 config, then 400 and the display turns off. Since I have no sound from dev2 I assume the amp and not just the display is off and yes my speaker cables are correctly configured, odd but correctly. No music or sound from dev2. Dev2 will work fine configured and used alone as a stereo amp. Once both amps have powered up dev1 continues to keep its display on, dev2 display off, no sound, and no reaction to pressing button on the unit. Cannot send config data now as away from any machine with sdcard function. I use digital cable for connection. I have USB, Ethernet, Wifi, digital, and line in configured on the master and none on the slave.
...snip, snip
Is this how your configuration is setup? Note the setup for speakers ( set to Mono ) and connection of the digital cable between the two units.
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
