20-Mar-2016, 04:03
Having the d 200 now for a week in my system. It is a demo model from a dealer so i guess it is more or less burned in. During initial setup i restrict the max output to 30
Watts. My listening is between - 30 and - 15, - 15 is really loud. Glad to report that i do not detect any loss of resolution at lower volume settings. This was my main concern before buying the amp. I have not tried higher output settings and compare the sound, kind of a lazy guy.
Ogs, re time alignment. Have build wooden blocks which i put on top of the subs, removed the tweeter from fame and put them on these blocks and then pushed them back, around 23 cm. sounds a lot better, much more depth, soundstage is deeper and wider, more like that of a good dynamic speaker. Additionally everything sounds more natural. A friend who owns the same speaker came over for a listen once. First we listened with tweeter time aligned. Then i hit pause and pushed tweeter forward to its original position and hit play. After a few seconds my friend said, put them back. The difference is quite big
Watts. My listening is between - 30 and - 15, - 15 is really loud. Glad to report that i do not detect any loss of resolution at lower volume settings. This was my main concern before buying the amp. I have not tried higher output settings and compare the sound, kind of a lazy guy.
Ogs, re time alignment. Have build wooden blocks which i put on top of the subs, removed the tweeter from fame and put them on these blocks and then pushed them back, around 23 cm. sounds a lot better, much more depth, soundstage is deeper and wider, more like that of a good dynamic speaker. Additionally everything sounds more natural. A friend who owns the same speaker came over for a listen once. First we listened with tweeter time aligned. Then i hit pause and pushed tweeter forward to its original position and hit play. After a few seconds my friend said, put them back. The difference is quite big
Highly modded avantgarde omega duos, slightly modded d200, d-sonics m3 800 s class d amp to drive the subs of my duos, all equipment on silent running audio platforms.
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
