Users of the AES/EBU input and cables

[Mikeeo]

There is a note on a possible approach here:

http://www.rane.com/pdf/ranenotes/Interf..._SPDIF.pdf

More interesting is the Blue Jeans note:

http://www.bluejeanscable.com/articles/75ohmrca.htm

As Pim says, pertinent issues are those of attenuation and interference from outside (I guess neither should be a problem) but the shortcomings of the impedance mismatch might be usefully explained, if anyone knows.

Ian,

Thanks for the supplied links! For me this was a decider. In a mix of views and information I'll drop the 110 ohm lead and i will use my 75 ohm cable but as reported before I will use a Lundahl transformer inside the Neutrik XLR meaning 75/110 conversion will be at the plug and not on the cable. Despite Devialets view on this I feel this is better than just running a 110 ohm cable with a so-so 75 ohm signal into the 110 transformer in the Dev.

Will report back when done!

Tanks/Mike