The 120 has been swapped. Power button feels more solid so should be ok now. I did notice that the first one almost required no break-in period and sounded great out-of-the box already. The new one sounded far from the level it should be. 48 hours later it sounded great again.
Normal temperature is 43 degrees. In pass tru mode it is now 55 when using the default -5db value. I had to increase the output volume of the HT source as it sounded to low in volume. I did try changing the default value to 0db however the device temperatute in pass tru became 64 degrees. Ok according to Devialet but I thought I could easily lower it bu tweaking the default and the output of the HT source.
Normal temperature is 43 degrees. In pass tru mode it is now 55 when using the default -5db value. I had to increase the output volume of the HT source as it sounded to low in volume. I did try changing the default value to 0db however the device temperatute in pass tru became 64 degrees. Ok according to Devialet but I thought I could easily lower it bu tweaking the default and the output of the HT source.
Devialet 220 Expert Pro CI | Sonus Faber Olympica II | Crystal cable speaker cables, interlink and power cables | ROON Rock on Intel NUC | Netherlands
