DEVIALET+YG

[TKS500]

Welcome to the forum TKS,

First of all, your translation software works 100%.

You mention you are using 2 times D250. Does that mean you are using them in two times stereo or as a D1000? I know Devialet and YG have worked together on an active system.

My D250 is not a PRO, so DualMono would be 800, but I am using two stereo amps bi-amped instead of DualMono.

The reason for this is that my current speakers, YG.A's Anat Reference, have a very low impedance, and I thought that DualMono would put a severe strain on the amplifier section. I used D250s in stereo and assigned one D250 per Anat Reference MainModule to drive it.

In addition, the lower Woofer is preouted from the D250 and driven by a Lab.gruppen IPD2400. Therefore, this system has a rather irregular tri-amp configuration.

(Left TW,MID)←(Left D250)       (Right D250)→(Right TW,MID)
　　　　　          (Preout)↓         ↓(Preout)
              (Left WF)←←←(IPD2400)→→→(Right WF)

YG.A, VIVID.A, Estelon, and the Original Nautilus AXD are very interesting, and my system configuration was influenced by them, and my close friends and I thought about it and improved it. Incidentally, the MainModule utilizes the internal network, but the D250 is used for low cut and time axis correction, while the Woofer passes the internal network and the IPD is used for cross setting and frequency correction according to the room. It was a difficult setup, but the result was good: the bass range was expanded and the stability was improved in all sound ranges.