13-Sep-2015, 18:16
(09-Sep-2015, 10:26)Pim van Vliet Wrote:(09-Sep-2015, 09:59)markush Wrote: I have got a Devialet 120 and right installed the current firmware 8.1.3
As a loudspeaker I am using the B&W 804 Diamond. I also configured that in the configurator
and BW 804D appears also on the startup screen at the Devialet. Though there is no difference
between SAM On and choosing between 0% and 100% or even having SAM on / off.
Any ideas?
It definitely isn't right. Delete everything off your SD card. Take it out of your computer and put it back in. Check it's really empy. Then re-do the configuration from start. Good luck!
(13-Sep-2015, 11:29)Rufus McDufus Wrote: I get more bass with SAM set at 100% but I wouldn't say it's more coherent. I find some tracks sound better with it on with SAM at different percentages and others (probably half or more) sound better with it off.
A few tracks also seem to induce thumps - almost like an exaggeration of a thump that's already on the track. These can be loud. It is worst with SAM on 100% and barely happens with it set to 50% or less (and not at all when off). I've logged a ticket with Devialet about this and they do seem to be looking into it.
Ok - please update here too when you get a notification from Devialet.
Maybe your room has also an impact on the problems you described.