Cartridges and phono settings

[boba2013]

Bob - It is via the remote, using the display on the Devialet amp itself.  This is quite well described in the "firmware 8.1" manual, available via Google, plus a copy of this is automatically downloaded with the firmware itself.

Thanks Confused. Got it, read it, got a lot of testing to do!

If I may ask a few more questions to the group. There are 3 areas in RAM to sort of play with, Max Level, Loading and pf.

The configurator has the cartridge in it's library and as per the vendor, the Ortofon Cadenza Red is set automatically at:

Max Level: 0.45
Loading: 460 ohm
pf: 0

At this level, the meters are showing ~-60 to -45 range. 

Changing Loading, pf or Max Level, up or down does not seem to have any appreciable change in the meters.

Changing the Max Level down to 0.35 seems to increase the sensitivity requiring one to turn volume down a bit for same volume level as 0.45. It seems to a better setting for this cartridge. It generates the question, are others also find themselves changing the Max Level as well or are you sticking with what the vendor or configurator provides?

Thanks in advance.

Bob