26-Nov-2015, 20:31
At a minimum you will need a digital cable ( with RCA to RCA connectors ) to connect the two, though some use a digital cable with XLR on one side and RCA on the other.
You will need to run the configurator on the Devialet site to set them up as a D400 and after making one the master and the other the slave, you all need to download the updated configuration for each unit to the SD card for the respective unit and re start the Devialets.
If you are going to use inputs on both Devialets you will need to use a "link" cable as well.
I only use the inputs on the master so I don't use the link cable. If you decide you want to use inputs on both I suspect you may have to purchase the link cable as I am not sure if it is included with the D200 when bought alone. I do know it is included if you purchase a companion separately.
Let me know if that helps, and here is another link on the topic from this site.
http://devialetchat.com/showthread.php?tid=503
Barr
You will need to run the configurator on the Devialet site to set them up as a D400 and after making one the master and the other the slave, you all need to download the updated configuration for each unit to the SD card for the respective unit and re start the Devialets.
If you are going to use inputs on both Devialets you will need to use a "link" cable as well.
I only use the inputs on the master so I don't use the link cable. If you decide you want to use inputs on both I suspect you may have to purchase the link cable as I am not sure if it is included with the D200 when bought alone. I do know it is included if you purchase a companion separately.
Let me know if that helps, and here is another link on the topic from this site.
http://devialetchat.com/showthread.php?tid=503
Barr
Roon ROCK on Intel NUC6i5SYH/Ethernet | VPI Avenger | Devialet 440 Pro CI | Vivid Audio Giya G3 | Auralic Aires Mini | Synology 1812+ NAS
SXSW, US
