18-Jul-2016, 23:31
(18-Jul-2016, 22:56)BrianT Wrote: Audio_Engr
This is how my Air 3 beta Ethernet is set up, I have had no problems for over 5 weeks with this set up.
1) Go to the Devialet Configurator, open the Ethernet preferences.
Turn DHCP off
put in a fixed ip address, I use 169.254.200.24
save it and load it to your Dev.
2) Turn your Dev on and select Ethernet
3) On your Mac, open System Preferences, then open Network Preferences, select Ethernet
Change Configure IPv4: to "Using DHCP with manual address"
I use 169.254.200.12
The first 3 numbers are the same as on the Dev, only the last number is different.
Keep System Preferences open.
4) Open Sound Preferences, and select "Devialet Air" as the output
5) Open Audirvana Plus Preferences, select Audio Tab
Preferred Audio Device select "Devialet Air"
6) Start Air 3 beta, select "My Devialet-ETH"
All should be working fine.
Good Luck Brian
Voila !! It works and does sound much cleaner than the USB.
A BIG thank you for this BrianT. Sincerely appreciated ...
=================================================
Howz the Audioprana cable working for you ? I've the stock Devialet one & am contemplating to go the S/PDIF to AES-EBU route
Roon Nucleus w/ Hypsos PSU & AQ Tornado + Roon RAAT > AQ Diamond ETH > etherREGEN using SFP + Hypsos PSU | CEC TL-5 CD Transport + AQ Z3 + 3 x Orea Indigo > AQ Diamond AES/EBU
Devialet 440-Pro CI > AQ Wel Sig RCA-XLR | 6 x Orea Bronze, 2 x Synergistic Research Atmosphere PC | B&W 802 D3 {Bi-wired} > AQ WEL Signature (Biwire)
REL G1-Mk2 pair | PS Audio PP 12 + AQ NRG-1000 | Puritan GroundMaster + RouteMaster | SAM DISABLED - DPM OFF - Northern Virginia - US