Very Poor Ethernet Performance

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

Very Poor Ethernet Performance

CongoFather Offline

Member

Posts: 71
Threads: 3
Joined: Jul 2017
Reputation: 5

#15

23-Oct-2019, 17:51

If you assign static ip addresses to some devices in your home network, then be sure that your router does assign new ip addresses to new connected devices from a non-conflicting , different ip address range. If ip conflict occurs, then you may experience such problems.
I have about 6 different devices connected to my switch some of which have static assigned ip addresses. I use the range (192.168.1.2 -192.168.1.30) for static ip-address assignments(total of 29 different device). Therefore I changed the setting on the router so that it assigns new ip addresses starting from 192.168.1.31 in order to prevent any ip conflict.
Probably, executing "ipconfig /renew" command totally solved your issue.

Stereo Setup: Synology DS214Play NAS/Internet sources>> Supra CAT8 >> Ubiquiti Edge10X Switch>> Fiberoptical Cable >> SOTM SNH-10G Switch(S-Booster LPS) >> Supra CAT8 >> Euphony v4(Stylus with Qobuz, Tidal) running on RAM >> SOTM SNH-10G >> Supra CAT8 >> Mercury Streamer (GentooPlayer, MPD+UpMpdCli running on RAM) + Fiio PL50 LPS >> Mogami Gold AES XLR >> Devialet 220 Pro >> Echole Omnia Speaker/Jumper Cables >> B&W 804D3 Speakers on IsoAcoustics GAIA-II

Headphone Setup: Synology DS214Play NAS(CAT8) >> Ubiquiti Edge10X Switch>> Fiberoptical Cable >> SOTM SNH-10G Switch(S-Booster LPS) >> Supra CAT8 >> Euphony v4( Stylus with Qobuz, Tidal) running on RAM >> SOTM SNH-10G >> Supra CAT8 >> Mercury Streamer(GentooPlayer , Mpd/UpMpdCli ) + Fiio PL50 LPS >> RCA Coax >> Chord Hugo >> Fostex TH900 MK2