Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
At last, Dialog (aka Arch) and Remote have grown up!
#1
Amidst all the hype of the Phantom I, the Dialog II aka Arch was also announced, adding analog inputs, phone stage, digital coax, minus optical and the heat of Dialog I.
https://www.devialet.com/en-au/product/ME810/

Together with the Remote II, which was made quietly available a few months ago, Devialet has finally caught up with the competition.
https://www.devialet.com/en-au/phantom-s...ew-remote/

Welcome as they are, I wonder why it has taken 5 years for Devialet to add such obvious functionality. Has Devialet gutted their engineering department so much that they are unable to do relatively simple things?  We are not talking about bleeding edge technology that Devialet invented.  The phone stage was taken from the Expert Pro range, analog inputs and digital coax are well known.  How hard was it to add beyond volume control and pause of Remote I?  Not to mention the buggy software releases...

(Apologies to any Devialet engineers reading this; it is not your fault that there are so few of you and most of the senior experienced ones have left).
Reply
#2
Argh I wish SO MUCH it had HDMI though Smile
Reply
#3
my "legacy" remote died ... what a coincidence
Current: Phantom Silvers, Oppo 105D (Toslink), Raspberry Pi + Digi+, ROON
Pre-Phantom: PenAudio Rebel2, Nuforce MCH-2C5, Oppo 105D (Analog)
Reply
#4
any mention about the resolution available on the A2D of the Arch?
Current: Phantom Silvers, Oppo 105D (Toslink), Raspberry Pi + Digi+, ROON
Pre-Phantom: PenAudio Rebel2, Nuforce MCH-2C5, Oppo 105D (Analog)
Reply
#5
(03-Feb-2021, 02:48)trashken Wrote: any mention about the resolution available on the A2D of the Arch?
Not that good, if it is the same as this...
https://devialetchat.com/Thread-my-syste...9#pid99229

Any multiple steps of data conversion should be avoided if possible...
Reply
#6
(03-Feb-2021, 02:47)trashken Wrote: my "legacy" remote died ... what a coincidence
Check battery?  Or are you looking for the excuse to upgrade?  Big Grin
Reply
#7
(02-Feb-2021, 23:12)Snoopy8 Wrote: Amidst all the hype of the Phantom I, the Dialog II aka Arch was also announced, adding analog inputs, phone stage, digital coax, minus optical and the heat of Dialog I.
https://www.devialet.com/en-au/product/ME810/

Can't find anything about digital coax, and there's only the ethernet port besides the analog L/R inputs? 
Reply
#8
(03-Feb-2021, 02:58)Snoopy8 Wrote:
(03-Feb-2021, 02:47)trashken Wrote: my "legacy" remote died ... what a coincidence
Check battery?  Or are you looking for the excuse to upgrade?  Big Grin

swapped.. light would blink but won't pair anymore.
Current: Phantom Silvers, Oppo 105D (Toslink), Raspberry Pi + Digi+, ROON
Pre-Phantom: PenAudio Rebel2, Nuforce MCH-2C5, Oppo 105D (Analog)
Reply
#9
(03-Feb-2021, 10:53)trashken Wrote:
(03-Feb-2021, 02:58)Snoopy8 Wrote:
(03-Feb-2021, 02:47)trashken Wrote: my "legacy" remote died ... what a coincidence
Check battery?  Or are you looking for the excuse to upgrade?  Big Grin

swapped.. light would blink but won't pair anymore.
Reboot the speakers and it will probably pair again.
Living room: Kii Three/BXT with Control.
Den: Tannoy Precision 8 iDP with TS112 iDP subwoofer.
In the cupboard, waiting for a sibling: 1st gen. Phantom Silver running DOS1
My Phantom Voyage
Reply
#10
(03-Feb-2021, 10:45)Vegus Wrote: Can't find anything about digital coax, and there's only the ethernet port besides the analog L/R inputs? 

   


(03-Feb-2021, 10:53)trashken Wrote: swapped.. light would blink but won't pair anymore.
I assumed you tried on both Phantoms.  Otherwise, time for the Remote II.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)