28-Aug-2014, 20:47
@theaudioguru - I've never even considered running my Cadenza on high ohms. So an interesting post from yourself, I'll certainly give this a try when I get some time!
Cartridges and phono settings
|
28-Aug-2014, 20:47
@theaudioguru - I've never even considered running my Cadenza on high ohms. So an interesting post from yourself, I'll certainly give this a try when I get some time!
30-Aug-2014, 03:51
(28-Aug-2014, 20:47)Confused Wrote: @theaudioguru - I've never even considered running my Cadenza on high ohms. So an interesting post from yourself, I'll certainly give this a try when I get some time! @Confused Yeah my dealer recommended trying it and it worked really well for me. I did play with the power uvms settings , going lower than 400 gave me more volume and body but i wasn't too sure if it was wise to mess with? All tips welcome! Audioguru
Devialet 400 ,Magico S3, Aurender N100, Mac Mini + Amarra + Geekperfect, Vpi Avenger with 3D Arm, ortofon cadenza bronze, Ortofon Royal Spu Nude,
Sonos.
19-Sep-2014, 00:18
Hi, can someone share their settings for denon DL103 (I have pan upgraded one by Midas)?
Currently using MC, 300μV rms, 100ohm, 100pf, 1976 RIAA, 96khz. Thanks!
06-Dec-2014, 22:05
Anybody using an Audionote Io cartridge ?
16-Dec-2014, 18:14
Anyone have their recommended settings for the Ortofon 2M Black cartridge? Thanks.
Devialet 250 Pro, Bryston BDP-2, Acoustic Signature WOW XL with TA1000 Tonearm and Ortofon 2M cartridge, OPPO BDP-83SE, Stenheim Alumine Two, REL G2
27-Dec-2014, 16:34
Sumiko Bluepoint Special EVO III
MC, 2500μV rms, High, 0pf, 1976 RIAA, 96kHz
28-Dec-2014, 15:55
(27-Dec-2014, 16:34)Dr Tone Wrote: Sumiko Bluepoint Special EVO III After watching the digital input on Presonus Studio One I had to adjust the the voltage from 2500μV to 3000μV to get the digital clipping in control on my loudest EP. Of course that made a major sound improvement as well. My cartridge could just be hotter then spec, or 20% over cartridge value might be a safe margin for everyone to use. We should collect some more data if users have DAWs.
Cartridge outputs are normally specified for 0dB=5cm/sec (at 1kHz iirc) but plenty of records have a higher level than this recorded on them, so one needs to check whilst playing one's most heavily modulated record. I have heard +8dB to be a common max modulation level.
One doesn't strictly need a DAW, the input flashes red on the display if digital clipping of the ADC is approached. I have used this feature to set gain of all my analogue inputs. Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire
29-Dec-2014, 17:53
(19-Sep-2014, 00:18)GTX Wrote: Hi, can someone share their settings for denon DL103 (I have pan upgraded one by Midas)? I've got the Zu version of the Denon DL-103 and I'm using the settings: MC, 400μV rms, High ohm, 100pf, 1976 RIAA, 96khz. However, I really have no idea what the pF should be. All I have is the data that came with the cartridge. see attached image.
23-Jan-2015, 14:07
Looking for new cartridge i have those 2 in my mind // Audio note iQ1 or kiseki purpleheart . Can anybody tell me the settings about those cartridge ,then i Will be wery glad and i say hello from Denmark
AVM 8.3 Rosso volterra 2 ,speaker cable and other cable audio note , turntable tt2 de luxe , caridge clearaudio carisma mm, primare bd mrk 2 shyunata power generator,
|
« Next Oldest | Next Newest »
|