Tried to see if I could make my bars go higher or lower tonight. Tested one output level only 10 uV over (ie 570 uV) the Benz spec output and the a doubled one at 1100 uV.
Here comes the funny bit; No change on the meters behavior, still just slightly under -40 dB for both settings, however at the lower setting I def. had a louder sound than the higher output setting. What does this mean? The bars/meters have no practical use in 'optimizing' signal from phono. So what are they actually showing?
/Mike
I also tried the 192 kHz setting but I couldn't hear any difference or at least I was ambivalent about it.
/Mike
Here comes the funny bit; No change on the meters behavior, still just slightly under -40 dB for both settings, however at the lower setting I def. had a louder sound than the higher output setting. What does this mean? The bars/meters have no practical use in 'optimizing' signal from phono. So what are they actually showing?
/Mike
I also tried the 192 kHz setting but I couldn't hear any difference or at least I was ambivalent about it.
/Mike
Ex D400 Now Aavik U-300/Feickert Woodpecker2-Kuzma 4P-Kondo silver-Benz LPS-Teddy Pardo PSU/Naim Unitiserve-Teddy Pardo PSU/SF Guarneri Homage/Whole system decoupled by Ansuz DTC/Cables from Ansuz, DYI and other commercial/Dedicated mains and spur-Lampizator SILK