Devialet Wall Mount Instructions

[Dom]

This might sound stupid but does anyone have the pdf instructions for the wall mount? Tried google and a search on Devialet website but only shows pictures of the wall mount.

Picked one up from eBay but not sure what to do with the 4 round black bits, 2 white bits and 4 screws with star shaped heads

I thought all I had to do was mark 4 holes from the mount onto the wall and drill and then screw on.

[Hifi_swlon]

No, but from memory mine for the 250 came with;

4 black ‘rubber ring’ type washers which sit in grooves wall side
4 Black stoppers which Click on the Devialet side (maybe cover screws)
And the other two bits go together to allow slight repositioning of the screws.

The one for the 200 before it was similar.

I’d just measure centre to centre of the holes, drill the first then offer it up and mark the others.
I’d replace the screws with whatever suits your tools/walls. But obviously diamond tipped will sound better.

[K4680]

@Dom Hi, maybe the thread helps!
https://devialetchat.com/showthread.php?...l+mounting

[Dom]

No, but from memory mine for the 250 came with;

4 black ‘rubber ring’ type washers which sit in grooves wall side
4 Black stoppers which Click on the Devialet side (maybe cover screws)
And the other two bits go together to allow slight repositioning of the screws.

The one for the 200 before it was similar.

I’d just measure centre to centre of the holes, drill the first then offer it up and mark the others.
I’d replace the screws with whatever suits your tools/walls.  But obviously diamond tipped will sound better.

I have 2 white plastic rings that look like washers but doesn’t seem to fit tightly into anything
4 black stoppers ( 2 small and 2 big)
And 4 screws

I’m away at the moment and will not be back for another 3 weeks to try it out which is a pity.

Think I’ll try email the ebay seller and try Devialet as well. Thanks for the help guys.

[SteveI]

  Devialet - Wall mount instructions.pdf (Size: 147.78 KB / Downloads: 163)

The attached PDF should help explain where the bits go. Its a copy of the wall mount instruction diagram.

[rchinn]

Skip the perspex mount. Four screws do the job.

[Greg]

Actually, if the fix is solid, two will do.

[NickB]

Yes both my 1000 Pro amps are on 2 screws each as is my 120.

[Dom]

The attached PDF should help explain where the bits go. Its a copy of the wall mount instruction diagram.

Thanks received that from Devialet as well, tried attaching in a reply but couldn’t figure it out and gave up

Was going to use screws as well but saw a good price on eBay so picked it up. I have my second system on a mana table and it does make a difference and now my main system’s amplifier is hung up on a wall vertically

[Hifi_swlon]

The attached PDF should help explain where the bits go. Its a copy of the wall mount instruction diagram.

Thanks received that from Devialet as well, tried attaching in a reply but couldn’t figure it out and gave up  

Was going to use screws as well but saw a good price on eBay so picked it up. I have my second system on a mana table and it does make a difference and now my main system’s amplifier is hung up on a wall vertically  

I used diamond/rubidium tipped screws to mount my frame to the wall. The SQ difference was staggering.