Posts: 38
Threads: 2
Joined: Oct 2015
Reputation:
0
I found that, if I switch off the server, Air is disabled and it's set to never stream to this device when I switch back on.
Colin
Vivid Audio Giya G2s, Devialet 1000 Pro CI, Sonic Transporter i7, Sean Jacobs DC3 LPS, Marantz UD 7007.
Shunyata Denali, Alpha PC, Sigma PCs (x3) & Sigma Speaker Cables.
Quadraspire X Reference rack.
North East England
Posts: 47
Threads: 4
Joined: May 2016
Reputation:
0
Hi thumb5.
The answer to both is yes..
Cheers
As i said.. it was working perfectly until i rearranged my room.
No settings have changed.
Posts: 46
Threads: 9
Joined: Jan 2015
Reputation:
1
(02-Jun-2017, 07:35)Saunter Wrote: LOL... Mute is not on.... FMC = ?
FMC = Fiber Media Converter - the TP Links devices that take ethernet on one device use fiber to connect to another device, which outputs ethernet again, thereby isolating any electrical noise from the ethernet.
Few other things to check:
1) try a different ethernet cable (even if an inferior one). Sometimes the termination jiggles around making an unreliable connection
2) Keep the rightmost button on the remote pressed till you enter the diagnostic screens on the Dev, then repeatedly press it till you see the two vertical green/orange bars that show signal amplitude. Make sure that's showing an input signal when music is playing. That helps you decipher is the issue is between PC and Dev or Dev and speakers
3) I've messed this up once before - make sure you are connecting the speakers to the right binding posts, since it's easy to use the wrong ones. Step 2 should show dancing bars if this is the case.
Devialet 1000Pro CI + Sonus Faber Cremona Auditor M
Posts: 47
Threads: 4
Joined: May 2016
Reputation:
0
Thanks for all the responses...
Last night i turned my system on in order to check a few things.
I re plugged in the Ethernet cable for about the fifth time.
Ethernet worked without a hitch and without me changing anything.
Seems obvious that the cable has a problem, or at least the plug..
Thanks to all who tried to help.
Get a cable tester or if confident re plug the ends. Plugs are cheap but a cable tester isn't, there again a new cable is cheap. No good relying on a dodgy cable.
Posts: 47
Threads: 4
Joined: May 2016
Reputation:
0
Hmmm,
Well my joy was short lived..
It is not working again and nothing has changed.
Is it possible that there is a problem with the Ethernet input on the amp ?