Posts: 202
Threads: 7
Joined: Mar 2015
Reputation:
5
10-Mar-2016, 14:41
(This post was last modified: 10-Mar-2016, 14:42 by AllenB.)
My remote works fine clock-wise (volume up) but 'skips' on anti-clockwise (volume down), as if the little cogs (presumably) inside are not fully engaging. Not all the time, but most of the time.
Is this dust or dirt in the mechanism, or has my remote become faulty. Is there a way to clean and or inspect the inner workings and bring it back to full working order?
Thanks
Allen
Devialet 220 Pro, TQ Black Mains & Ultra Black Speaker Cables, Naim Ovators S600, Sonore microRendu (Roon & HQP) with Uptone JS-2
TRNC (North Cyprus)
Posts: 38
Threads: 1
Joined: Feb 2016
Reputation:
4
I'd say it's more likely to be a connection issue - is there anything in the placement of Devialet and remote that could obstruct the signal? Is the amp wall mounted?
Unless you can actually feel the skipping, then it could well be mechanical failure. Has the remote been dropped?
• Kuzma Stabi S turntable • Kuzma Stogi S arm • Benz Micro ACE H cartridge • PC with MusicBee / WASAPI source • Oyaide d+ NEO B-Class USB cable • Devialet 200 amplifier • Blue Jeans Ten speaker cable • GoldenEar Triton One •
Posts: 1,151
Threads: 14
Joined: May 2014
Reputation:
26
Some of the early remotes (the very first ones with the D170/110) back in 2013 had issues like this. I can imagine with wear and tear that they may all go this way though - potentiometer tracks wearing out perhaps? Not sure how new yours is. Sounds like a warranty replacement is the route to try.
Posts: 698
Threads: 14
Joined: Sep 2014
Reputation:
57
AllenB,
I had an issue with my remote, where the volume responded erratically to the rotation of the volume knob. Sometimes it worked differently when rotated slowly than when rotated quickly. It also developed a bit of gritty feel. I took it to my dealer, who gave it one spin, and pronounced it faulty. He gave me another remote. which I took it home, and the problem was solved.
Note that I did have to do a config adjustment where I spec't two remotes. Since then I've fussed with the config and selected one remote, and did the pairing procedure. All is fine.
From your description, I would suspect the remote is faulty.
Damon
Powernode, NAD M32, Cambridge CD transport, Analysis Plus, Nordost, iFi Nova, CSS Criton 1TDX, KEF C62
Vancouver, Canada