Hi Phantom Enthusiasts and Gurus,
I have a Pair of Phantom speakers.
My goal is to build Dolby Atmos Home theater using ONLY phantom speakers.
The way I am planning to do it by:
1) Buy more Phantom Speakers
2) Buy an AVR or AV processor with Dolby Atmos decoding and Preouts for each channel and connect one dedicated Phantom speaker to each Prepout channel using analog wire (3.5 mm Jacks).
3) Set the volume of all Phantom Speakers to 80% and the same latency for each Phantom Speaker (using Phantom App)
4) Control the volume of all speakers using the AV processor (or AVR) and do more sync correction using AV processor (or AVR) ONLY if needed.
Is there any problem in the above setup which I not considering? Any suggestion?
Thanks in advance.
I have a Pair of Phantom speakers.
My goal is to build Dolby Atmos Home theater using ONLY phantom speakers.
The way I am planning to do it by:
1) Buy more Phantom Speakers
2) Buy an AVR or AV processor with Dolby Atmos decoding and Preouts for each channel and connect one dedicated Phantom speaker to each Prepout channel using analog wire (3.5 mm Jacks).
3) Set the volume of all Phantom Speakers to 80% and the same latency for each Phantom Speaker (using Phantom App)
4) Control the volume of all speakers using the AV processor (or AVR) and do more sync correction using AV processor (or AVR) ONLY if needed.
Is there any problem in the above setup which I not considering? Any suggestion?
Thanks in advance.
