Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
well as long as they come from the companies expensive line
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 433
Threads: 44
Joined: Apr 2015
Reputation:
6
14-Aug-2015, 00:06
(This post was last modified: 14-Aug-2015, 00:08 by Manoet.)
Actually they don't come from there either. That's reserved for medical Schurter devices with EMI and RFI filtering and due to lives at stake listed as "mission critical" components. Almost $30 a pop in 1k quantities. Guess that's what a body's worth. I always thought the age-old motorcycle adage of "if you have a $10 head buy a $10 helmet." So I'm left with an $800 dollar helmet (does that mean I have an $800 head!?!) and a $1m insurance policy with an insurance premium that's the same for either helmet. Whatta world, whatta world!
Statements in my posts are opinion only, not to be construed as fact. Any projects I engage in are at my own risk! Their outcome cannot be assured and may result in success, small/no change or catastrophic failure. I encourage no one rely on anything I say or do as gospel and to realize your mileage may vary!
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
manoet good news... you can just use this!
http://www.furutech.com/2013/02/02/1870/
should plug straight back in
If the helmet costs as much as the head im pretty sure i wouldnt have any protection at all
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 433
Threads: 44
Joined: Apr 2015
Reputation:
6
14-Aug-2015, 00:18
(This post was last modified: 14-Aug-2015, 00:19 by Manoet.)
Those I have 1st hand experience with! Hands-down better than Schurter. Have one I keep around and all 3 components i've tried it in to-date sounded worse with than without. And they aren't plug-n-play with the Schurter. Closer yes but a 3-wire pigtail still has to be made/used tho you "might" be able to get away with only one (Ground). I'll dig it out tomorrow & take a look-see.
Statements in my posts are opinion only, not to be construed as fact. Any projects I engage in are at my own risk! Their outcome cannot be assured and may result in success, small/no change or catastrophic failure. I encourage no one rely on anything I say or do as gospel and to realize your mileage may vary!
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
so what are you going to do about the lack of holding clips on the furutech inlet?
double sided tape?
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 433
Threads: 44
Joined: Apr 2015
Reputation:
6
14-Aug-2015, 00:32
(This post was last modified: 14-Aug-2015, 00:40 by Manoet.)
The FI-06 F'tech as well as all others in the line come with non-magnetic T316 SS flush-mount screws. I'll just drill/tap the rear panel on both sides of the IEC cut-out. You should be able to see that IEC at the F'tech site and the mounting screws/provision. They can also be front or rear panel mounted but rear mounting requires a larger cut-out so I'll stick with front-mount tho I'll move it an additional 1.5mm to the left to avoid interference with Optical 2 jack on rear of Devialet.
Link to FI-06 spec sheet;
http://www.vhaudio.com/furutech-fi-06.pdf
Statements in my posts are opinion only, not to be construed as fact. Any projects I engage in are at my own risk! Their outcome cannot be assured and may result in success, small/no change or catastrophic failure. I encourage no one rely on anything I say or do as gospel and to realize your mileage may vary!
Posts: 433
Threads: 20
Joined: Apr 2015
Reputation:
3
(14-Aug-2015, 00:32)Manoet Wrote: The FI-06 F'tech as well as all others in the line come with non-magnetic T316 SS flush-mount screws. I'll just drill/tap the rear panel on both sides of the IEC cut-out. You should be able to see that IEC at the F'tech site and the mounting screws/provision. They can also be front or rear panel mounted but rear mounting requires a larger cut-out so I'll stick with front-mount tho I'll move it an additional 1.5mm to the left to avoid interference with Optical 2 jack on rear of Devialet.
Link to FI-06 spec sheet; http://www.vhaudio.com/furutech-fi-06.pdf
i suppose your warranty is already null and void isnt it!
and i was just kidding mauidan
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
Posts: 433
Threads: 44
Joined: Apr 2015
Reputation:
6
(14-Aug-2015, 05:16)completeluxury Wrote: i suppose your warranty is already null and void isnt it!
Deader-n-fried chicken I'd say
Statements in my posts are opinion only, not to be construed as fact. Any projects I engage in are at my own risk! Their outcome cannot be assured and may result in success, small/no change or catastrophic failure. I encourage no one rely on anything I say or do as gospel and to realize your mileage may vary!