Posts: 97
Threads: 12
Joined: Jan 2016
Reputation:
8
I have seen the panning issue using FW 1.5.0.1 twice, its not fixed.
Using optical input on Phantom when encountered.
Power cycle on both phantoms and the dialog resolved so far both times.
Posts: 1,431
Threads: 33
Joined: Jun 2015
Reputation:
61
Have you reported the problem to Devialet?
Living room: Kii Three/BXT with Control.
Den: Tannoy Precision 8 iDP with TS112 iDP subwoofer.
In the cupboard, waiting for a sibling: 1st gen. Phantom Silver running DOS1
My Phantom Voyage
Posts: 1,431
Threads: 33
Joined: Jun 2015
Reputation:
61
16-Jan-2016, 13:42
(This post was last modified: 16-Jan-2016, 13:43 by ragwo.)
The optical input on the Phantom is stereo, if that is what you mean. Connect an optical source to one Phantom and there will be sound in both speakers.
Living room: Kii Three/BXT with Control.
Den: Tannoy Precision 8 iDP with TS112 iDP subwoofer.
In the cupboard, waiting for a sibling: 1st gen. Phantom Silver running DOS1
My Phantom Voyage
Posts: 1,431
Threads: 33
Joined: Jun 2015
Reputation:
61
The signal goes from the Phantom to the Dialog and back to the Phantoms. You can't connect a source to the ethernet connections. It's only for communication between the Phantoms and the Dialog. If you want to use the ethernet connections you have to connect the Phantoms and the Dialog to the same router.
Living room: Kii Three/BXT with Control.
Den: Tannoy Precision 8 iDP with TS112 iDP subwoofer.
In the cupboard, waiting for a sibling: 1st gen. Phantom Silver running DOS1
My Phantom Voyage
Posts: 21
Threads: 2
Joined: Sep 2015
Reputation:
1
Hi Syver - I had the same difficulties as you for awhile. If you hook up the ATC to the router via ethernet then it should help to create the robust network we all hope for. If you do this then you need to put your ISP modem in to bridge mode and allow ATC to handle DHCP and NAT.