01-Dec-2019, 01:00
(26-Nov-2019, 05:29)JDtheJD Wrote:Standby mode is available in DOS-1 and DOS-2. The only difference I have observed is that in DOS-, you would need to press and hold the back button for a longer duration (7 to 10 seconds) before the woofers make a flapping sound. In DOS-2 I think they have reduced that interval.(25-Nov-2019, 21:36)photometer Wrote: I used a Kill-A-Watt meter to test the Phantom Classic White running DOS-2
Idle mode: (connected to Bluetooth) - 15watts
Idle mode: (Bluetooth disconnected) - 15 watts
Booting: momentarily goes up to 30watts and then settles to 15watts.
Long press the button on back to go to Standby mode - 0.4 watts <= I always do this at night
Playing music at volume 30 - 20 watts.
The Phantom feels warm on all modes except on standby mode or completely switched off. In fact, sometimes I don't know if the device is ON or OFF, so I quickly pass my hand on the rear of the Phantom to feel the warmth or turn on the Devialet App.
photomaster- is the standby mode only available in DOS-2 and do you have to place the phantoms in standby individually? Your insight would be appreciated. Best, JD.
All Phantoms have to be put in standby mode individually. I really wish they had a mechanism to put the device in standby mode through the APP.