Posts: 628
Threads: 11
Joined: Jun 2014
Reputation:
3
Devialet 200 <> Bowers & Wilkins 805 Diamond <> Aurender N100 <> Clearaudio Concept MC <> Audioquest Rocket 44/Coffee USB
The Netherlands
Posts: 85
Threads: 1
Joined: Jun 2014
Reputation:
1
I've been told that DACs and pre-amps are generally more sensitive to power-issues than power amps. Which leads me to wonder if a power conditioner or power cord could help isolate noise from the power-amp from reaching e.g. the DAC. For Devialet with SMPS which typically are noisy, I would expect Devialet engineers to have done a good job isolating the internals from noise, but perhaps not paid too much attention from stopping it from leaking out?
I've not tried Devialet with power conditioner (I sold mine before buying the DP), but before that I ended up buying a power conditioner as I found myself enjoying music much more late evening/ night when all the washing machines had stopped and the noise level on the grid had improved.
A small story on speaker cables, for your experiment if you like. I once had a mid-priced speaker cable that was a bit too long and lying around on the floor. Hence, I coiled it up behind the speaker to tidy the room (just a few turns). A few hours later a friend came by and immediately raised his eyebrows and asked what I had done to the sound, he claimed it sounded much thinner (i.e. a true blind-test).
QNAP TS219P II/ TIDAL-Hifi > Roon@mac-mini > AIR3-Cat6 > Devialet 250 > Audience AU24 SE > Gallo-3.5Ref (w/ SAM)
Posts: 1,364
Threads: 15
Joined: Jun 2014
Reputation:
47
(08-Jul-2014, 17:47)Eddye Wrote: Your mate has a point, room acoustics are very important and most of us do little to improve this, and most cable and other tweaks are likely down to the placebo effect. Still the placebo effect is proven to be very effective in battling illness. So I wonder if the placebo effect is really a bad thing?
My experience also tells me that the room acoustics, and particularly the position of the speakers in the room are critical.
In my view if one is not in a position to optimise this, swmbo and all that, there is a limit beyond which further expenditure is a waste.
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire
Posts: 628
Threads: 11
Joined: Jun 2014
Reputation:
3
(08-Jul-2014, 19:50)f1eng Wrote: (08-Jul-2014, 17:47)Eddye Wrote: Your mate has a point, room acoustics are very important and most of us do little to improve this, and most cable and other tweaks are likely down to the placebo effect. Still the placebo effect is proven to be very effective in battling illness. So I wonder if the placebo effect is really a bad thing?
My experience also tells me that the room acoustics, and particularly the position of the speakers in the room are critical.
In my view if one is not in a position to optimise this, swmbo and all that, there is a limit beyond which further expenditure is a waste. Agreed. The cheapest tweak is taking a few hours to place your speakers correctly. Lots of how-to's on this to be found on the internet.
Devialet 200 <> Bowers & Wilkins 805 Diamond <> Aurender N100 <> Clearaudio Concept MC <> Audioquest Rocket 44/Coffee USB
The Netherlands
Posts: 1,151
Threads: 14
Joined: May 2014
Reputation:
26
The Devialet SMPS,is actually incredibly noisy in terms of how much noise gets chucked back onto the mains - according to my Audioprism noise tester that is (which may well not be the be-all and end-all of noise measurement but it's a rough indication). I have never measured any other hi-fi device which is worse. I keep my Devialet on a separate spur as a result.
Posts: 1,364
Threads: 15
Joined: Jun 2014
Reputation:
47
(08-Jul-2014, 18:58)Borgen Wrote: For Devialet with SMPS which typically are noisy, I would expect Devialet engineers to have done a good job isolating the internals from noise, but perhaps not paid too much attention from stopping it from leaking out?
A small story on speaker cables, for your experiment if you like. I once had a mid-priced speaker cable that was a bit too long and lying around on the floor. Hence, I coiled it up behind the speaker to tidy the room (just a few turns). A few hours later a friend came by and immediately raised his eyebrows and asked what I had done to the sound, he claimed it sounded much thinner (i.e. a true blind-test).
I would be surprised if the designer did that, and I think one doesn't get a CE certification if kit radiates interference.
A coil of cable adds inductance, so changing the electrical characteristics of the cable. It has been advised against for decades.
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire
Posts: 155
Threads: 16
Joined: May 2014
Reputation:
5
(08-Jul-2014, 10:27)f1eng Wrote: (08-Jul-2014, 10:04)ZincAlloy Wrote: Flip sake Frank, after spending all that money on the Goldmunds, now I can see why you can't afford decent speaker cable!!
Well when I bought the Goldmunds between 15 and 20 years ago, they were less pricy. I auditioned them, Goldmund Apologues, Wilson WAMM and Grand SLAMM, B&W Nautilus, NAIM DBL and some big Focals and the Goldmunds were the best to my ears then. Mind you, I wanted to prefer the Nautilus since I adore the styling.
OTOH I am an engineer and since there is no mechanism by which a cable can effect sound quality the only way IMHO that anybody hears a difference in them (and I believe them when they say they do) is either the placebo effect, or expectation bias.
Perfectly functional cables are available for a modest sum. I have experimented in considerable depth with, and can probably afford, fancy cables but am still unconvinced.
The only ones that sounded better to me were MIT cables with the filter(?) boxes, and they were twice the price of my amp at the time, which is obscene IMO.
(07-Jul-2014, 22:02)GuillaumeB Wrote: (07-Jul-2014, 21:51)f1eng Wrote: Not wanting to damage my 130,000 Euro Goldmunds or £30,000 Tune Audio speakers
Now you're just showing off!
Guillaume
Sorry, just hoping to put things in perspective for those who have never heard of Goldmund or Tune Audio...
Frank - I was being a bit naughty and winding you up. Given your investment in your kit, I'm quite sure you can buy what you want! My house is probably worth less than your Goldmunds......! But be very clear that I admire your dedication to our hobby. Jealous? Un peu ...... Enjoy, Frank.
Auralic Aries G2 > Kii Control > Kii Audio 3 BXT
Posts: 85
Threads: 1
Joined: Jun 2014
Reputation:
1
(08-Jul-2014, 20:05)f1eng Wrote: (08-Jul-2014, 18:58)Borgen Wrote: For Devialet with SMPS which typically are noisy, I would expect Devialet engineers to have done a good job isolating the internals from noise, but perhaps not paid too much attention from stopping it from leaking out?
A small story on speaker cables, for your experiment if you like. I once had a mid-priced speaker cable that was a bit too long and lying around on the floor. Hence, I coiled it up behind the speaker to tidy the room (just a few turns). A few hours later a friend came by and immediately raised his eyebrows and asked what I had done to the sound, he claimed it sounded much thinner (i.e. a true blind-test).
I would be surprised if the designer did that, and I think one doesn't get a CE certification if kit radiates interference.
A coil of cable adds inductance, so changing the electrical characteristics of the cable. It has been advised against for decades.
Most refrigerators and washing machines generate lots of noise back on the grid and they still get their CE approval. Medical equipment has special filtering to remove noise and to protect equipment.
As for the "coil" issue, I was just trying to make the point that as long as your cable is curled behind your racks or situated next to other cables or equipment that may radiate then this might be coloring the sound (I was not recommending this as a good practise).
QNAP TS219P II/ TIDAL-Hifi > Roon@mac-mini > AIR3-Cat6 > Devialet 250 > Audience AU24 SE > Gallo-3.5Ref (w/ SAM)
Posts: 2,411
Threads: 125
Joined: May 2014
Reputation:
31
09-Jul-2014, 10:13
(This post was last modified: 09-Jul-2014, 12:54 by GuillaumeB.)
I've just set up a new poll to see how many people on here can actually hear differences with cables and their Devialet. Please vote! Thanks!
Guillaume
Industry disclosure: UK distributor for Shunyata Research
220 PRO, totaldac d1 server with additional external power supply, totaldac d1-seven, Echole PSU for Totaldac, Wilson Audio Sasha 2, Shunyata Research cables, Shunyata Hydra Alpha A10 + DPC-6 v3, Various Entreq ground boxes and cables, Entreq Athena level 3 rack, 2 X SOtM sNH-10G with sCLK-EX + 10MHz Master Clock input + sPS-500 PSU, i5 sonicTransporter w/ 1TB SSD
UK
Posts: 4,303
Threads: 129
Joined: Jun 2014
Reputation:
174
A few digs at (not so) poor mr F1eng here re the cost of some of his old kit.......
However, I think this gives rise to an interesting point. Here is someone with legacy kit with a price tag beyond that most of us could afford. But now he is using Devialet amplification as a preference. OK, the D800 is not a "budget" option, but most of us here already own 5K to 20k worth of Devialet amplification. The conclusion being that the "ultra high end" / state of the art performance is perhaps, very slowly, moving towards something a little more affordable.
Of this, we should all be glad....
|