25-Jul-2022, 17:58
(25-Jul-2022, 17:38)mdconnelly Wrote:(24-Jul-2022, 18:26)daniel.avasilichioaei Wrote:Maybe I'm being a bit over-cautious (and a little bit dense) but....(24-Jul-2022, 17:53)mdconnelly Wrote: @audio_engr - How are you configuring your RCA - XLR link in the Master-L/Master-R configurations? Are you just setting the XLR as an audio input in the Master of the Master-R configuration so that your Master-L config ink connection is the RCA and the Master-R config link connection is the XLR? This has me a bit confused because it doesn't appear you can configure a Master-Companion with the XLR connection on the Master. I must be missing something.
Any insight is appreciated. Thanks.
"Are you just setting the XLR as an audio input in the Master of the Master-R configuration so that your Master-L config ink connection is the RCA and the Master-R config link connection is the XLR?"
Answer: Yes.
In configurator, you can edit again the master from the "Master-L" configuration and perform these actions (on master unit):
- Rename the master from "Master-L" to Master-R".
- Change the speaker from left to right.
- Turn off all audio inputs, and turn on XLR input only.
- Save the configuration file.
In creating the new Master-R (or Master-Slave), rather than starting with a new dual-mono config, I can just edit the prior Master-L config file I saved, rename it to Master-R, turn off all audio inputs and turn on the XLR. Do I turn off the Chaining Input from the Master-L config as well?
You use RCA - XLR link in the Master-L/Master-R, right? In this case, the only active input from Master-R must be XLR.
With the Master-L you can activate any audio input you need, exactly the same as with the master-companion configuration (in fact, you can use the same configuration file).