Sweet Room

[listener]

Hello,

- there are posts about this tool, somewhere here, also
- if the file is present, it will operate this, otherwise not - so you are right
- there are failure in this option, be careful and control the effects with e.g. REW and a UMIK microphone, best
- with SAM active, only a few filter will work (about first 3, 4 or5)
- it is not recommended, to do a correction above about 100 Hz, it might sound awful
- start with the lowest frequency, a correction will have an effect of all the other frequencies, first the doubled, than mixed
- you should not hope to get a correction with a +dB, as the gaps are mostly from room deleting effects
- benefit of this tool, IMHO, is that it has an effect at all sources like Vinyl or TV, as the filter for streaming e.g. in Roon effects only that
- thats why I correct the main room mode only

example of eq.txt:

// Name for this EQ configuration
"NAME":"EQ",

// Remote indicator
// Allow for the bottom's right button to toggle between main and alternate set of EQs
// Useful in A/B tests or during fine EQ tuning
"REMOTE",

// Parameters for left channel
// Static dB gain for the left channel
"dB_GAIN_L":"0.0", // main gain
"dB_GAIN_L_ALT":"0.0", // alternate gain

// Peak/Notch filters for the left channel (main)
// syntax:"EQ_x_L":[Frequency, dB_gain, Q_factor]
"EQ_1_L":[0.0, 0.0, 0.0],
"EQ_2_L":[0.0, 0.0, 0.0],
"EQ_3_L":[0.0, 0.0, 0.0],
"EQ_4_L":[0.0, 0.0, 0.0],
"EQ_5_L":[0.0, 0.0, 0.0],
"EQ_6_L":[0.0, 0.0, 0.0],
"EQ_7_L":[0.0, 0.0, 0.0],
"EQ_8_L":[0.0, 0.0, 0.0],
"EQ_9_L":[0.0, 0.0, 0.0],

// Peak/Notch filters for the left channel (alternate)
// syntax:"EQ_x_L_ALT":[Frequency, dB_gain, Q_factor]
"EQ_1_L_ALT":[38.0, -6.0, 10.0],
"EQ_2_L_ALT":[0.0, 0.0, 0.0],
"EQ_3_L_ALT":[0.0, 0.0, 0.0],
"EQ_4_L_ALT":[0.0, 0.0, 0.0],
"EQ_5_L_ALT":[0.0, 0.0, 0.0],
"EQ_6_L_ALT":[0.0, 0.0, 0.0],
"EQ_7_L_ALT":[0.0, 0.0, 0.0],
"EQ_8_L_ALT":[0.0, 0.0, 0.0],
"EQ_9_L_ALT":[0.0, 0.0, 0.0],

// Parameters for right channel
// Static dB gain for the right channel
"dB_GAIN_R":"0.0", // main gain
"dB_GAIN_R_ALT":"0.0", // alternate gain

// Peak/Notch filters for the right channel (main)
// syntax:"EQ_x_R":[Frequency, dB_gain, Q_factor]
"EQ_1_R":[0.0, 0.0, 0.0],
"EQ_2_R":[0.0, 0.0, 0.0],
"EQ_3_R":[0.0, 0.0, 0.0],
"EQ_4_R":[0.0, 0.0, 0.0],
"EQ_5_R":[0.0, 0.0, 0.0],
"EQ_6_R":[0.0, 0.0, 0.0],
"EQ_7_R":[0.0, 0.0, 0.0],
"EQ_8_R":[0.0, 0.0, 0.0],
"EQ_9_R":[0.0, 0.0, 0.0],

// Peak/Notch filters for the right channel (alternate)
// syntax:"EQ_x_R_ALT":[Frequency, dB_gain, Q_factor]
"EQ_1_R_ALT":[40.0, -10.0, 10.0],
"EQ_2_R_ALT":[0.0, 0.0, 0.0],
"EQ_3_R_ALT":[0.0, 0.0, 0.0],
"EQ_4_R_ALT":[0.0, 0.0, 0.0],
"EQ_5_R_ALT":[0.0, 0.0, 0.0],
"EQ_6_R_ALT":[0.0, 0.0, 0.0],
"EQ_7_R_ALT":[0.0, 0.0, 0.0],
"EQ_8_R_ALT":[0.0, 0.0, 0.0],
"EQ_9_R_ALT":[0.0, 0.0, 0.0],