Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Which turntable: Linn or Rega
#1
Hi! 

What do think, which one would be better choise (cannot compare at home):
- Linn Sondek LP-12 (10 years old with ittok lvII, Lingo II, Trampolin, Cirkus)
- Rega Planar 8 or 10 with Apheta 3

I have 1000Pro and Sonus Fabers. 

if Linn, which cartridge for it, Adikt MM or Koil MC?
Reply
#2
On table >> Linn with MC
Wall mounting >> Rega 10 with Apheta plus SUT


Gesendet von iPhone mit Tapatalk
Reply
#3
(28-Jan-2023, 15:38)RayMo Wrote: Hi! 

What do think, which one would be better choise (cannot compare at home):
- Linn Sondek LP-12 (10 years old with ittok lvII, Lingo II, Trampolin, Cirkus)
- Rega Planar 8 or 10 with Apheta 3

I have 1000Pro and Sonus Fabers. 

if Linn, which cartridge for it, Adikt MM or Koil MC?

Hi.

As far as cartridges go: looking at the specs of the Koil, the output is only 0.4 mV. There are posts on this forum where people have had to use a separate step up transformer in front of their Devialet as the low output from a MC cartridge means that you have to whack the volume up to get a decent volume level, which can cause noise. The output from the Adikt is 6.5 mV which won’t cause the same problems. You might find that the Adikt is a better choice.
Oppo BDP-105 - Roon lifetime - Dutch & Dutch 8c 
South Coast England
Reply
#4
Thanks, ghosttipper and Axel, good tips!
Reply
#5
There are a few posts here regarding my experience trying the Rega RP10 with a Devialet. Might be of interest?

https://devialetchat.com/Thread-Which-tu...a#pid71602
1000 Pro - KEF Blade - iFi Zen Stream - Mutec REF10 - MC3+USB - Pro-Ject Signature 12
Reply
#6
Now testing friend’s Axis. It has Oracle-labeled arm and Audioquest cartridge. I do not know, if it is mc or mm - cannot find any info by qooqling. This Axis is sensitive to environment, walking near the turntable (congrete floor) causes noise from speakers.


Attached Files Thumbnail(s)
   
Reply
#7
Thanks, Confused Smile
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)