(11-Dec-2017, 11:46)frenek Wrote: [ -> ] (11-Dec-2017, 03:15)Axel Wrote: [ -> ]It was enabled all the time, just switch the headphone amp on, mute the speakers and away you go.
Ok, that is fine , than I can still use the tone-button to control tone, what I prefer
Yes, exactly. I didn’t want to lose any remote functionality either.
New info, if you press source button 2 seconds you can control the sound and can keep pre on/off on tone button
(17-Dec-2017, 20:52)frenek Wrote: [ -> ]New info, if you press source button 2 seconds you can control the sound and can keep pre on/off on tone button
Thanks, I’ll give it a try.
(17-Dec-2017, 20:52)frenek Wrote: [ -> ]New info, if you press source button 2 seconds you can control the sound and can keep pre on/off on tone button
Sorry, could you please explain this in more detail?
I decided to load a Companion Configuration file that was my last known good one for pre-out function, which I used before the CI upgrade and it works perfectly. It *should* work, worth a try anyway. So if anyone is using a two amp setup, wants to use pre-outs from the Companion and would like a copy, drop me a PM.
Edit: The only hiccup may be the SAM profile, but you might be able to edit the file with the Configurator to suit.
(18-Dec-2017, 12:44)Axel Wrote: [ -> ] (17-Dec-2017, 20:52)frenek Wrote: [ -> ]New info, if you press source button 2 seconds you can control the sound and can keep pre on/off on tone button
Sorry, could you please explain this in more detail?
Hmmmm.......which details should I give. It works at described.
In the config for the remote I selected pre on/off on the tone button, I did nothing else with remote config.
If I press the source button 2 seconds I can control the tone on this button.
Sorry there are no more details for remote config.
(18-Dec-2017, 15:23)frenek Wrote: [ -> ] (18-Dec-2017, 12:44)Axel Wrote: [ -> ] (17-Dec-2017, 20:52)frenek Wrote: [ -> ]New info, if you press source button 2 seconds you can control the sound and can keep pre on/off on tone button
Sorry, could you please explain this in more detail?
Hmmmm.......which details should I give. It works at described.
In the config for the remote I selected pre on/off on the tone button, I did nothing else with remote config.
If I press the source button 2 seconds I can control the tone on this button.
Sorry there are no more details for remote config.
If you press the source button for two seconds, it shows the type of the incoming signal. I don’t understand how you can control the tone from here. There is nothing to be gained from turning the pre-outs on and off. It can be left on all the time.
This subject of having the pre-outs defeatable is getting under my skin. Why would anyone need to do this? Is it detrimental to the SQ of the amp to have them on all the time? If you were using them to feed another power amp, as a record out or, as in my case to feed a headphone amp, why the need to turn them off in software? There are many amps on the market with pre amp. outs and I bet few of them are defeatable. If you don’t need them, don’t use them.
I seem to be having a similar problem with the pre out.
Ever since the CI upgrade, the Pre out-that I use to drive my subwoofer- is always off by default at start up. Despite being set as active in the configurator. As a workaround, I have programmed the "tone" button on the remote to "sub" (also works with programming the tone button to "Bass") so I can easily turn on the pre out- but would really like the Pre out to just stay active- as it is is set up with the configurator. Waiting to hear back from DeVialet (two weeks now). Any body have any solutions?
(22-Dec-2017, 01:14)aftonomos Wrote: [ -> ]I seem to be having a similar problem with the pre out.
Ever since the CI upgrade, the Pre out-that I use to drive my subwoofer- is always off by default at start up. Despite being set as active in the configurator. As a workaround, I have programmed the "tone" button on the remote to "sub" (also works with programming the tone button to "Bass") so I can easily turn on the pre out- but would really like the Pre out to just stay active- as it is is set up with the configurator. Waiting to hear back from DeVialet (two weeks now). Any body have any solutions?
What amps are you using? If you’ve got dual mono’s and are using pre-outs on the slave, I have a configuration that will work.