Detailed? Or just missing bass? - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet Classroom (https://devialetchat.com/Forum-Devialet-Classroom) +--- Thread: Detailed? Or just missing bass? (/Thread-Detailed-Or-just-missing-bass) Pages:
1
2
|
RE: Detailed? Or just missing bass? - Pim - 11-Oct-2023 (11-Oct-2023, 12:31)BoyScout Wrote: I also tested a fantastic REL, but I think, despite the many adjustments I made over a couple of weeks, I never got the integration that would make me keep it... and I returned it to the dealer. I've recently integrated my best mate's subs. These are the steps I took. Program a 20ms delay to the speakers in the Expert Set the subs up where they fit (next to the speakers in this case. Set a volume that feel like it's equal with the speakers Turn the phase until you can hear them integrate with the main speakers. Phase, to my knowledge, is just a delay. So because the mains speakers are already delayed, the subs are now 'in front'. Once you have delayed them enough to 'line up', they sound great. Fine tune volume from there on. Don't ever, and I mean EVER, use bass heavy music to tune subs. Use a simple female vocal track. Even female voices have some depth to them. Once you hear that bit of depth to the voice, that's it. Don't push it any louder. RE: Detailed? Or just missing bass? - Delija - 11-Oct-2023 RELs don't have variable phase setting - only 0/180 which is basically polarity. And with high-level connections which are preferred for RELs - you can't use delay. So, the only way to properly set phase/delay is to change the subwoofer(s) position - closer or further from the MLP. RE: Detailed? Or just missing bass? - Pim - 12-Oct-2023 (11-Oct-2023, 23:20)Delija Wrote: RELs don't have variable phase setting - only 0/180 which is basically polarity. In light of this: don’t buy REL RE: Detailed? Or just missing bass? - chrisc - 16-Nov-2023 Is there a way from the remote to change the voltage output of the sub? The level control on the B&W DB-1 stopped working and I'd like to reduce the bass a bit RE: Detailed? Or just missing bass? - Pim - 17-Nov-2023 (16-Nov-2023, 14:01)chrisc Wrote: Is there a way from the remote to change the voltage output of the sub? I’m pretty sure you can set the output Voltage in the configurator. It’s a bit more work but it’ll be set for good once you get the right level. |