Dialog Questions - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Phantom I (103 DB, 108 DB, Premier Classic, Silver & Gold) (https://devialetchat.com/Forum-Phantom-I-103-DB-108-DB-Premier-Classic-Silver-Gold) +--- Thread: Dialog Questions (/Thread-Dialog-Questions) Pages:
1
2
|
RE: Dialog Questions - kameraguy - 12-Feb-2016 When you are doing the initial setup, make sure you are connecting Dialog + both Phantoms on the same AC circuit (IE: the same room). They need to communicate via PLC to sync. Then when done, you will have two Dialog networks, one per Phantom, for communication as well. This is normal. Phantom+ Dialog appear to dynamically communicate via PLC and Wifi, depending on which communication method is best at the time. It sounds like you may not have initially setup Phantom on the same AC circuit, which may explain the latency/dropout issues. RE: Dialog Questions - Slamdunk17 - 13-Feb-2016 (12-Feb-2016, 08:56)kameraguy Wrote: When you are doing the initial setup, make sure you are connecting Dialog + both Phantoms on the same AC circuit (IE: the same room). They need to communicate via PLC to sync. Then when done, you will have two Dialog networks, one per Phantom, for communication as well. This is normal. Phantom+ Dialog appear to dynamically communicate via PLC and Wifi, depending on which communication method is best at the time. Thank you I will give this a try. So once I do the initial setup on the same AC circuit then can I move my phantoms back upstairs on a different AC. This would be based on a wifi connection as I'm not interested in doing Ethernet. I also have the phantoms on a surge protector. Can I put them back on the surge protector once the setup is done as well? Prior to the new update I had one successful connection without doing this. I wonder why it worked. RE: Dialog Questions - Slamdunk17 - 13-Feb-2016 (12-Feb-2016, 08:10)Johnnydev Wrote:(12-Feb-2016, 07:46)Ílahyene Wrote:(12-Feb-2016, 05:19)Slamdunk17 Wrote: I finally jumped on a second phantom with dialog. When I set everything up in the same room it works well but my router had to get moved to my office downstairs so I moved the dialog with it. My phantoms remained upstairs in my living space. Sorry should have been more clear. When they are in the same room the connection is great. It's only when I have the dialog next to my router/ access point downstairs in my office and the phantoms upstairs in my living space do I run into setup and connection problems. Wether I'm upstairs or downstairs I'm assuming my entire house should be on the same powerphase. I'm using a surge protector as I live in an area that needs it time to time to protect my electronics. I wonder if it's safe to just directly plug into the walls even during a lightning storm. RE: Dialog Questions - f1eng - 13-Feb-2016 The surge protector is probably preventing the data over power line system working well. My Dialog is 0.6 meter from one of the Phantoms and about 3.5 meters from the other and if I plug the dialog into a filtered mains outlet I get dropouts, so wifi is not reliable for me even over such a short distance. The choice for a clean system is either wired ethernet or unfiltered power sockets IME, and I tried loads of things for months before I came to this conclusion. Having written that I have 3 Phantoms, two set up for TV and a third which I can put in any room and it works so far everywhere I have put it (using unfiltered power sockets) including rooms which are on a different ring-main to the Dialog and w-a-y out of wifi range, so the contact through the mains is very robust I would say. RE: Dialog Questions - Slamdunk17 - 14-Feb-2016 (13-Feb-2016, 17:57)f1eng Wrote: The surge protector is probably preventing the data over power line system working well. My Dialog is 0.6 meter from one of the Phantoms and about 3.5 meters from the other and if I plug the dialog into a filtered mains outlet I get dropouts, so wifi is not reliable for me even over such a short distance.Thank you. Worked like a charm. Who would have thought a simple setup would help. The surge protector with both phantoms plugged in definately confused the dialog RE: Dialog Questions - sekriT - 15-Feb-2016 (14-Feb-2016, 23:03)Slamdunk17 Wrote:(13-Feb-2016, 17:57)f1eng Wrote: The surge protector is probably preventing the data over power line system working well. My Dialog is 0.6 meter from one of the Phantoms and about 3.5 meters from the other and if I plug the dialog into a filtered mains outlet I get dropouts, so wifi is not reliable for me even over such a short distance.Thank you. Worked like a charm. Who would have thought a simple setup would help. The surge protector with both phantoms plugged in definately confused the dialog Yes, power filters will block the PLC connections. I have 2 of them. I hope Wifi will work for you on different levels. My dialog is in the basement with the server, phantoms in the living room. Even though initial setup worked, dialog eventually lost one or both phantoms and required repeated resets. This is because dialog wanted to use 2.4Gz bandwidth which is very crowded in my neighborhood. I ended up wiring via ethernet and it has been stable since then. |