(16-Jun-2017, 21:38)Wdw Wrote: All,

Quick question to any that may have some thoughts to share.  I have the trigger cable installed between the two units and have clicked on the "Trig in" on the master in Configurator.  I inadvertently clicked on the AES on the slave unit and the graphic changed to show the line drawn between the two units.  
(see screen shot below)
This makes me wonder if the trigger is not talking to the slave unless an input is selected on the slave.  
I had assumed the trigger was sharing temperature and related information between the two units even when "trig in" is toggled on but a slave input not selected with the line drawn as per below.  Hope this makes sense.

Cheers,
WDW

(17-Jun-2017, 01:37)Axel Wrote:

(16-Jun-2017, 21:38)Wdw Wrote: All,

Quick question to any that may have some thoughts to share.  I have the trigger cable installed between the two units and have clicked on the "Trig in" on the master in Configurator.  I inadvertently clicked on the AES on the slave unit and the graphic changed to show the line drawn between the two units.  
(see screen shot below)
This makes me wonder if the trigger is not talking to the slave unless an input is selected on the slave.  
I had assumed the trigger was sharing temperature and related information between the two units even when "trig in" is toggled on but a slave input not selected with the line drawn as per below.  Hope this makes sense.

Cheers,
WDW

If your first configuration showed no line between the trigger sockets, then no trigger cable is needed. 

If you aren't using any inputs on the Companion, you don't need to connect the trigger cable.

Here's my configuration as an example: 

(17-Jun-2017, 01:52)Wdw Wrote:

(17-Jun-2017, 01:37)Axel Wrote:

(16-Jun-2017, 21:38)Wdw Wrote: All,

Quick question to any that may have some thoughts to share.  I have the trigger cable installed between the two units and have clicked on the "Trig in" on the master in Configurator.  I inadvertently clicked on the AES on the slave unit and the graphic changed to show the line drawn between the two units.  
(see screen shot below)
This makes me wonder if the trigger is not talking to the slave unless an input is selected on the slave.  
I had assumed the trigger was sharing temperature and related information between the two units even when "trig in" is toggled on but a slave input not selected with the line drawn as per below.  Hope this makes sense.

Cheers,
WDW

If your first configuration showed no line between the trigger sockets, then no trigger cable is needed. 

If you aren't using any inputs on the Companion, you don't need to connect the trigger cable.

Here's my configuration as an example: 

Always was under the impression the trigger cable performed a "system's maintenance" function such as thermal management even if not using any ''slave' input".  So are you saying that if not using any of the slave inputs I do not need the trigger cable at all?  

WDW

(16-Jun-2017, 21:38)Wdw Wrote: All,

Quick question to any that may have some thoughts to share.  I have the trigger cable installed between the two units and have clicked on the "Trig in" on the master in Configurator.  I inadvertently clicked on the AES on the slave unit and the graphic changed to show the line drawn between the two units.  
(see screen shot below)
This makes me wonder if the trigger is not talking to the slave unless an input is selected on the slave.  
I had assumed the trigger was sharing temperature and related information between the two units even when "trig in" is toggled on but a slave input not selected with the line drawn as per below.  Hope this makes sense.

Cheers,
WDW

(01-Aug-2017, 12:52)Carcrashboy Wrote: I currently have the trigger cable and an RCA-RCA digital between master and companion with inputs from AV receiver and sub into the companion.

I have been considering using an RCA-AES (DH Labs D110) after reading about perceived improvements in sound.

After reading this thread and playing with the configurator it appears that if I go with the D110 cable then I cannot have any inputs to the companion?

And I would not need the trigger cable either?

Thanks

(01-Aug-2017, 13:09)Confused Wrote:

(01-Aug-2017, 12:52)Carcrashboy Wrote: I currently have the trigger cable and an RCA-RCA digital between master and companion with inputs from AV receiver and sub into the companion.

I have been considering using an RCA-AES (DH Labs D110) after reading about perceived improvements in sound.

After reading this thread and playing with the configurator it appears that if I go with the D110 cable then I cannot have any inputs to the companion?

And I would not need the trigger cable either?

Thanks

Both points correct!

(01-Aug-2017, 16:13)mdconnelly Wrote: So help me understand... is the purpose of the trigger cable solely to enable inputs on the Companion?    If I want to enable the Pre-outs on the companion (for headphones) but do not need inputs on the Companion, I don't need a trigger cable but I will need to run the chaining cable SPDIF -> AES/EBU.    Is that correct?