+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro)
+--- Thread: changing configuration if I dont have the latest software installed (/Thread-changing-configuration-if-I-dont-have-the-latest-software-installed)
Pages:
1
2
changing configuration if I dont have the latest software installed - andrewd - 13-Jan-2018
Hi, I have a Devialet D200 and I have not upgraded the software for many years. i don't particularly want to as I understand this messes with the sound, which I quite like.
I would like to change some of the configuration settings (change output type etc). How do I do this? I understand that the online configurator can only be used if you have the latest software installed.
RE: changing configuration if I dont have the latest software installed - thumb5 - 13-Jan-2018
In my experience, the configurator can be used even if your Devialet's firmware is not up to date. I ran 7.1.x firmware for a few years during which versions 8.x and 9.x were released, and never had any problem using the configurator during that time.
To be on the safe side, just put the new config file on a second SD card or make sure you keep a back-up copy of your current config file (dp_cfg.txt) before trying the new one.
RE: changing configuration if I dont have the latest software installed - Axel - 13-Jan-2018
(13-Jan-2018, 13:55)andrewd Wrote: Hi, I have a Devialet D200 and I have not upgraded the software for many years. i don't particularly want to as I understand this messes with the sound, which I quite like.You don’t need the latest software to use the Configurator. Open an account on the Devialet site, if you haven’t already, then your new config will be saved. You can either start a new config. from scratch, or edit your existing. Doing this is fairly straightforward. If I were you, I’d save the current config files on my computer, then if anything goes awry, you have something to fall back on, plus it gives you the confidence to try new settings with nothing to worry about.
I would like to change some of the configuration settings (change output type etc). How do I do this? I understand that the online configurator can only be used if you have the latest software installed.
Start here: https://www.devialet.com/en-eu/configurator/wizard/new-config
Where it says "choose a model" there are three options. You need to choose Expert and take it from there.
Apologies for doubling up on some of the recommendations, Thumb posted as I was composing my answer.
RE: changing configuration if I dont have the latest software installed - andrewd - 16-Jan-2018
Ok thanks for the info
RE: changing configuration if I dont have the latest software installed - andrewd - 05-Feb-2018
I just changed speakers. When I changed the config, it noted that I needed firmware v8.3 for the config.
I tried anyway, and SAM turned off by default. When I tried turning on SAM - no sound. My previous speakers were one of the first to get SAM and it was working before I changed the firmware.
How do I find out what firmware version I have?
What are the good, bad and ugly in terms of D200 firmware versions? I understand some sound better than others.
RE: changing configuration if I dont have the latest software installed - Axel - 06-Feb-2018
(05-Feb-2018, 21:20)andrewd Wrote: I just changed speakers. When I changed the config, it noted that I needed firmware v8.3 for the config.
I tried anyway, and SAM turned off by default. When I tried turning on SAM - no sound. My previous speakers were one of the first to get SAM and it was working before I changed the firmware.
How do I find out what firmware version I have?
What are the good, bad and ugly in terms of D200 firmware versions? I understand some sound better than others.
Make one long press on the Tone control on the remote. On the first screen, you will see the software version you are running.
Apologies for the atrocious quality of the photo.
RE: changing configuration if I dont have the latest software installed - andrewd - 06-Feb-2018
Thanks, looks like I have v7.1.1.
It sounded good with my Dynaudio C1s and SAM so I didnt want to mess with it.
Now I have downgraded to Dynaudio Contour S3.4s and to use SAM with these speakers I need to upgrade the firmware. I am guessing there is no option for which firmware to get, the latest or nothing.
What do people think, should I upgrade firmware to current version to get SAM or leave it as is?
RE: changing configuration if I dont have the latest software installed - baddog - 07-Feb-2018
Personally, I have not had any regrets in updating the firmware over time. I do know there are some who feel various releases of the firmware sound better to them than other versions.
You could save your current configuration, and a copy of the firmware you have, and then try a newer version of the firmware. If you aren't happy you could re-load the earlier firmware and configuration.
RE: changing configuration if I dont have the latest software installed - andrewd - 07-Feb-2018
(07-Feb-2018, 01:42)baddog Wrote: Personally, I have not had any regrets in updating the firmware over time. I do know there are some who feel various releases of the firmware sound better to them than other versions.
You could save your current configuration, and a copy of the firmware you have, and then try a newer version of the firmware. If you aren't happy you could re-load the earlier firmware and configuration.
Thanks. Unfortunately I wasn't smart enough to keep a backup copy of the firmware installed. Do Devialet allow you to download a copy of any previous firmware version? Is there a way to write a firmware backup from the amp to the SD card?
For what its worth I am using a wired digital coax input, not Air or any other type of streaming.
RE: changing configuration if I dont have the latest software installed - K4680 - 07-Feb-2018
(07-Feb-2018, 06:42)andrewd Wrote:(07-Feb-2018, 01:42)baddog Wrote: Personally, I have not had any regrets in updating the firmware over time. I do know there are some who feel various releases of the firmware sound better to them than other versions.
You could save your current configuration, and a copy of the firmware you have, and then try a newer version of the firmware. If you aren't happy you could re-load the earlier firmware and configuration.
Thanks. Unfortunately I wasn't smart enough to keep a backup copy of the firmware installed. Do Devialet allow you to download a copy of any previous firmware version? Is there a way to write a firmware backup from the amp to the SD card?
For what its worth I am using a wired digital coax input, not Air or any other type of streaming.
Hello Andrewd, look here: https://devialetchat.com/downloads/firmware/