+- Devialet Chat (https://devialetchat.com)
+-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat)
+--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro)
+--- Thread: SAM setting for Atohm GT1 and Dev200 (/Thread-SAM-setting-for-Atohm-GT1-and-Dev200)
Pages:
1
2
SAM setting for Atohm GT1 and Dev200 - Flashman - 28-Feb-2018
When I bought my Devialet 170 -- now 200 -- when I lived in France in 2014, I elected also to purchase the Devialet-discounted Atohm GT1 special-edition speakers. I am still satisfied with the combination. As the GT1 was the first speaker to receive the SAM treatment, I think Devialet worked diligently on this SAM implementation.
So, a question for you who have the same combination: what setting do you use for SAM? I have mine set at 100 percent and find it works well over a wide spectrum of music. The bass is tight and, in fact, amazingly deep on some hi-rez material. I recognize that speaker response is also room-dependent but I am still curious about possibly playing with the SAM settings based on others' experience.
Cheers, Flashman a.k.a. Michael
RE: SAM setting for Atohm GT1 and Dev200 - Flashman - 19-Mar-2018
Up to 407 views but no replies. Perhaps I am one of the few who purchased the Devialet-specific Atohm GT1s. Or perhaps those who did purchase them are not on this forum.
RE: SAM setting for Atohm GT1 and Dev200 - alphafox - 19-Mar-2018
(19-Mar-2018, 13:25)Flashman Wrote: Up to 407 views but no replies. Perhaps I am one of the few who purchased the Devialet-specific Atohm GT1s. Or perhaps those who did purchase them are not on this forum.
Hello Flashman,
I had those specific GT1 when I bought a 120. Since then, I upgraded the 120 to 220 CI and sold the GT1 as I found them way too directive (which is normal for that kind of form factor).
Regarding the SAM settings, I always used them at 100% because the listening room was big enough to cope with the additional bass.
BR
Arnaud
RE: SAM setting for Atohm GT1 and Dev200 - Flashman - 19-Mar-2018
Thanks Arnaud. That's helpful information!
RE: SAM setting for Atohm GT1 and Dev200 - ogs - 19-Mar-2018
I've only briefly heard the GT1 at home. I agree with you that Devialet probably made extra efforts on SAM for these. I used them with my 250 and SAM at 100%. I think that is correct in most cases with the GT1. They are very nice speakers.
RE: SAM setting for Atohm GT1 and Dev200 - prouddaddycdn - 20-Mar-2018
I am a new Devialet owner, having picked up an Expert 120 along with the Atohm GT1 speakers last week. I have spent the past few days tinkering with firmwares, configurations and speaker partnering (I have a few different pairs) and feel that different firmwares require different levels of SAM on the GT1s.
With firmware 7.1.3, the bass is very full sounding so I keep SAM at approx. 50% in my given listening room. With firmware 8.1.3, I adjust SAM to 75% to get the same sort of bass extension I got with 7.1.3. With the latest 10.1.0, I can run SAM 100% and still not close to the bass extension I got with 7.1.3 so I have come to the conclusion that it is very firmware specific, at least in my room on the 120.
Loving the GT1s by the way.
RE: SAM setting for Atohm GT1 and Dev200 - Flashman - 20-Mar-2018
(19-Mar-2018, 19:41)ogs Wrote: I've only briefly heard the GT1 at home. I agree with you that Devialet probably made extra efforts on SAM for these. I used them with my 250 and SAM at 100%. I think that is correct in most cases with the GT1. They are very nice speakers.
Appreciate your feedback!
RE: SAM setting for Atohm GT1 and Dev200 - Flashman - 20-Mar-2018
(20-Mar-2018, 02:05)prouddaddycdn Wrote: I am a new Devialet owner, having picked up an Expert 120 along with the Atohm GT1 speakers last week. I have spent the past few days tinkering with firmwares, configurations and speaker partnering (I have a few different pairs) and feel that different firmwares require different levels of SAM on the GT1s.Appreciate your reply! I also love the GT1s!
With firmware 7.1.3, the bass is very full sounding so I keep SAM at approx. 50% in my given listening room. With firmware 8.1.3, I adjust SAM to 75% to get the same sort of bass extension I got with 7.1.3. With the latest 10.1.0, I can run SAM 100% and still not close to the bass extension I got with 7.1.3 so I have come to the conclusion that it is very firmware specific, at least in my room on the 120.
Loving the GT1s by the way.
RE: SAM setting for Atohm GT1 and Dev200 - Stino - 22-Mar-2018
I understood from most contributors here in the forum that SAM does not create a big difference anymore using the latest firmware. I share the same opinion.
RE: SAM setting for Atohm GT1 and Dev200 - Woodman - 25-Mar-2018
(22-Mar-2018, 20:31)Stino Wrote: I understood from most contributors here in the forum that SAM does not create a big difference anymore using the latest firmware. I share the same opinion.
I use SAM at 80% with my GT1's and have been very happy with them.