How to configure pre out and sub out on 250 - Printable Version +- Devialet Chat (https://devialetchat.com) +-- Forum: Devialet Chat (https://devialetchat.com/Forum-Devialet-Chat) +--- Forum: Devialet D-Premier, Expert 120/200/250, Expert 140/220/250 Pro (https://devialetchat.com/Forum-Devialet-D-Premier-Expert-120-200-250-Expert-140-220-250-Pro) +--- Thread: How to configure pre out and sub out on 250 (/Thread-How-to-configure-pre-out-and-sub-out-on-250) Pages:
1
2
|
How to configure pre out and sub out on 250 - wwm - 10-Dec-2014 Recently got a 250 and very pleased I am too. My query is the configurator informs what can be configured but does not give instructions on how to do it, for example pre out/sub out or have I "lost it". Any assistance gratefully recieved. Cheers, Bill RE: How to configure pre out and sub out on 250 - ozthepoz - 11-Dec-2014 (10-Dec-2014, 22:26)wwm Wrote: Recently got a 250 and very pleased I am too. My query is the configurator informs what can be configured but does not give instructions on how to do it, for example pre out/sub out or have I "lost it". Any assistance gratefully recieved. Tried this? - https://help.devialet.com/home Must admit the instructions for sub out are a bit vague. RE: How to configure pre out and sub out on 250 - wwm - 11-Dec-2014 (11-Dec-2014, 19:12)ozthepoz Wrote:(10-Dec-2014, 22:26)wwm Wrote: Recently got a 250 and very pleased I am too. My query is the configurator informs what can be configured but does not give instructions on how to do it, for example pre out/sub out or have I "lost it". Any assistance gratefully recieved. Hi Ozthepoz, Thanks for the link but been there and not that helpful, Perhaps I need a step by step instuction manual but they are becoming a rarity. Cheers, Bill. RE: How to configure pre out and sub out on 250 - GuillaumeB - 11-Dec-2014 (11-Dec-2014, 19:27)wwm Wrote:(11-Dec-2014, 19:12)ozthepoz Wrote:(10-Dec-2014, 22:26)wwm Wrote: Recently got a 250 and very pleased I am too. My query is the configurator informs what can be configured but does not give instructions on how to do it, for example pre out/sub out or have I "lost it". Any assistance gratefully recieved. There are lots of people on here using subs, perhaps someone could chime in with some practical help? Guillaume RE: How to configure pre out and sub out on 250 - wwm - 12-Dec-2014 (11-Dec-2014, 19:31)GuillaumeB Wrote:(11-Dec-2014, 19:27)wwm Wrote:(11-Dec-2014, 19:12)ozthepoz Wrote:(10-Dec-2014, 22:26)wwm Wrote: Recently got a 250 and very pleased I am too. My query is the configurator informs what can be configured but does not give instructions on how to do it, for example pre out/sub out or have I "lost it". Any assistance gratefully recieved. Hi Guillaume, Yes, i have read a number of post's where enthusiasts are using subs. I have connected mine using the high level inputs but I am curious about the sound quality using line level. Hopefully someone will give me a step by step guide. Cheers lots, Bill RE: How to configure pre out and sub out on 250 - thumb5 - 12-Dec-2014 Hello Bill - I'm driving my sub from a mono line output. Here's how I set it up from the configurator: * in the configurator by default you should see two connections headed "Digital", between the Line 1 and AES/EBU connectors * select the down-pointing arrow under the left-hand Digital heading, to bring up a configuration dialog headed "Digital 2 Settings" * select the "Pre-amplified Output (Mono)" option (the dialog box title will change to "Sub Settings") * the mix should be set to "Mono" by default; adjust the output level to suit your sub's line input if necessary * select the filter parameters you want to use, if any (most likely either full-range or low-pass) * select OK to close that dialog; the configurator should now show the connector as a "Sub" output That's the basic set-up. By bringing up the Speakers configuration dialog you can then configure the speaker output to use a high-pass filter if you wish. (I found this helped the sub and main speakers to integrate more effectively.) If you do that, you'll probably want the high-pass filter to apply when the pre-out is ON, but full-range output when the pre-out is OFF. Another option which I found helpful when setting up the sub is to configure one of the buttons on the remote to toggle the pre-out (that is, sub output) on and off. Hope that's helpful, and sorry in advance if I've missed anything. Let us know how you get on! Ian RE: How to configure pre out and sub out on 250 - wwm - 12-Dec-2014 (12-Dec-2014, 11:42)thumb5 Wrote: Hello Bill - I'm driving my sub from a mono line output. Here's how I set it up from the configurator: Hi Ian, Very many thanks for your concise guidance, just what I needed. Will have a play tomorrow and let you know the outcome. Cheers lots, Bill. RE: How to configure pre out and sub out on 250 - wwm - 13-Dec-2014 Hi again Ian, Cracked it, your help is most appreciated, thanks again. Cheers, Bill. RE: How to configure pre out and sub out on 250 - thumb5 - 13-Dec-2014 Great! My pleasure. RE: How to configure pre out and sub out on 250 - actx76092 - 09-Aug-2015 When I get to this step: By bringing up the Speakers configuration dialog you can then configure the speaker output to use a high-pass filter if you wish. There are no options I can change. . the "filtering section" - as most of the items - are grayed out? |