20-Mar-2021, 12:08
Hi,
I have 1000 Pro and doing some bass adjustments with the Sweet Room. (I use Roon but I do not use DSP there.)
My Sweet Room settings in the eq.txt file changes the sound in bass frequencies, but does not obey my general gain setting. I am trying to decrease it for both channels, but volume stays same in Main and Alternate - comparing by ear with higher than bass frequencies. And now I am getting distortion on bass frequencies. -12db or -26db, no effect, SAM on or off.
Can you help me on this, is there something wrong with settings?
Kind Regards, RayMo
Setting file for both Devs:
// Name for this EQ configuration
"NAME":"RamiEQ",
// Remote indicator
// Allow for the bottom's right button to toggle between main and alternate set of EQs
// Useful in A/B tests or during fine EQ tuning
"REMOTE",
// Parameters for left channel
// Static dB gain for the left channel
"dB_GAIN_L":"-12.0", // main gain
"dB_GAIN_L_ALT":"0.0", // alternate gain
// Peak/Notch filters for the left channel (main)
// syntax:"EQ_x_L":[Frequency, dB_gain, Q_factor]
"EQ_1_L":[40.0, 6.0, 5.0],
"EQ_2_L":[59.0, 5.0, 6.0],
"EQ_3_L":[61.0, 3.0, 6.0],
"EQ_4_L":[65.0, 5.0, 4.0],
"EQ_5_L":[0.0, 0.0, 0.0],
"EQ_6_L":[0.0, 0.0, 0.0],
"EQ_7_L":[0.0, 0.0, 0.0],
"EQ_8_L":[0.0, 0.0, 0.0],
"EQ_9_L":[0.0, 0.0, 0.0],
// Peak/Notch filters for the left channel (alternate)
// syntax:"EQ_x_L_ALT":[Frequency, dB_gain, Q_factor]
"EQ_1_L_ALT":[0.0, 0.0, 0.0],
"EQ_2_L_ALT":[0.0, 0.0, 0.0],
"EQ_3_L_ALT":[0.0, 0.0, 0.0],
"EQ_4_L_ALT":[0.0, 0.0, 0.0],
"EQ_5_L_ALT":[0.0, 0.0, 0.0],
"EQ_6_L_ALT":[0.0, 0.0, 0.0],
"EQ_7_L_ALT":[0.0, 0.0, 0.0],
"EQ_8_L_ALT":[0.0, 0.0, 0.0],
"EQ_9_L_ALT":[0.0, 0.0, 0.0],
// Parameters for right channel
// Static dB gain for the right channel
"dB_GAIN_R":"-12.0", // main gain
"dB_GAIN_R_ALT":"0.0", // alternate gain
// Peak/Notch filters for the right channel (main)
// syntax:"EQ_x_R":[Frequency, dB_gain, Q_factor]
"EQ_1_R":[40.0, -6.0, 5.0],
"EQ_2_R":[59.0, 6.0, 5.0],
"EQ_3_R":[65.0, 5.0, 4.0],
"EQ_4_R":[70.0, 6.0, 6.0],
"EQ_5_R":[0.0, 0.0, 0.0],
"EQ_6_R":[0.0, 0.0, 0.0],
"EQ_7_R":[0.0, 0.0, 0.0],
"EQ_8_R":[0.0, 0.0, 0.0],
"EQ_9_R":[0.0, 0.0, 0.0],
// Peak/Notch filters for the right channel (alternate)
// syntax:"EQ_x_R_ALT":[Frequency, dB_gain, Q_factor]
"EQ_1_R_ALT":[0.0, 0.0, 0.0],
"EQ_2_R_ALT":[0.0, 0.0, 0.0],
"EQ_3_R_ALT":[0.0, 0.0, 0.0],
"EQ_4_R_ALT":[0.0, 0.0, 0.0],
"EQ_5_R_ALT":[0.0, 0.0, 0.0],
"EQ_6_R_ALT":[0.0, 0.0, 0.0],
"EQ_7_R_ALT":[0.0, 0.0, 0.0],
"EQ_8_R_ALT":[0.0, 0.0, 0.0],
"EQ_9_R_ALT":[0.0, 0.0, 0.0],
I have 1000 Pro and doing some bass adjustments with the Sweet Room. (I use Roon but I do not use DSP there.)
My Sweet Room settings in the eq.txt file changes the sound in bass frequencies, but does not obey my general gain setting. I am trying to decrease it for both channels, but volume stays same in Main and Alternate - comparing by ear with higher than bass frequencies. And now I am getting distortion on bass frequencies. -12db or -26db, no effect, SAM on or off.
Can you help me on this, is there something wrong with settings?
Kind Regards, RayMo
Setting file for both Devs:
// Name for this EQ configuration
"NAME":"RamiEQ",
// Remote indicator
// Allow for the bottom's right button to toggle between main and alternate set of EQs
// Useful in A/B tests or during fine EQ tuning
"REMOTE",
// Parameters for left channel
// Static dB gain for the left channel
"dB_GAIN_L":"-12.0", // main gain
"dB_GAIN_L_ALT":"0.0", // alternate gain
// Peak/Notch filters for the left channel (main)
// syntax:"EQ_x_L":[Frequency, dB_gain, Q_factor]
"EQ_1_L":[40.0, 6.0, 5.0],
"EQ_2_L":[59.0, 5.0, 6.0],
"EQ_3_L":[61.0, 3.0, 6.0],
"EQ_4_L":[65.0, 5.0, 4.0],
"EQ_5_L":[0.0, 0.0, 0.0],
"EQ_6_L":[0.0, 0.0, 0.0],
"EQ_7_L":[0.0, 0.0, 0.0],
"EQ_8_L":[0.0, 0.0, 0.0],
"EQ_9_L":[0.0, 0.0, 0.0],
// Peak/Notch filters for the left channel (alternate)
// syntax:"EQ_x_L_ALT":[Frequency, dB_gain, Q_factor]
"EQ_1_L_ALT":[0.0, 0.0, 0.0],
"EQ_2_L_ALT":[0.0, 0.0, 0.0],
"EQ_3_L_ALT":[0.0, 0.0, 0.0],
"EQ_4_L_ALT":[0.0, 0.0, 0.0],
"EQ_5_L_ALT":[0.0, 0.0, 0.0],
"EQ_6_L_ALT":[0.0, 0.0, 0.0],
"EQ_7_L_ALT":[0.0, 0.0, 0.0],
"EQ_8_L_ALT":[0.0, 0.0, 0.0],
"EQ_9_L_ALT":[0.0, 0.0, 0.0],
// Parameters for right channel
// Static dB gain for the right channel
"dB_GAIN_R":"-12.0", // main gain
"dB_GAIN_R_ALT":"0.0", // alternate gain
// Peak/Notch filters for the right channel (main)
// syntax:"EQ_x_R":[Frequency, dB_gain, Q_factor]
"EQ_1_R":[40.0, -6.0, 5.0],
"EQ_2_R":[59.0, 6.0, 5.0],
"EQ_3_R":[65.0, 5.0, 4.0],
"EQ_4_R":[70.0, 6.0, 6.0],
"EQ_5_R":[0.0, 0.0, 0.0],
"EQ_6_R":[0.0, 0.0, 0.0],
"EQ_7_R":[0.0, 0.0, 0.0],
"EQ_8_R":[0.0, 0.0, 0.0],
"EQ_9_R":[0.0, 0.0, 0.0],
// Peak/Notch filters for the right channel (alternate)
// syntax:"EQ_x_R_ALT":[Frequency, dB_gain, Q_factor]
"EQ_1_R_ALT":[0.0, 0.0, 0.0],
"EQ_2_R_ALT":[0.0, 0.0, 0.0],
"EQ_3_R_ALT":[0.0, 0.0, 0.0],
"EQ_4_R_ALT":[0.0, 0.0, 0.0],
"EQ_5_R_ALT":[0.0, 0.0, 0.0],
"EQ_6_R_ALT":[0.0, 0.0, 0.0],
"EQ_7_R_ALT":[0.0, 0.0, 0.0],
"EQ_8_R_ALT":[0.0, 0.0, 0.0],
"EQ_9_R_ALT":[0.0, 0.0, 0.0],