14-Aug-2016, 07:56
Hi Franz, I have the Melco N1A but did not get the Mutec in the end.
Mutec MC-3+ USB
|
14-Aug-2016, 07:56
Hi Franz, I have the Melco N1A but did not get the Mutec in the end.
Ok, I guess I just have to try it then
Melco N1A - Devialet 440 Pro - B&W 802 D3
14-Aug-2016, 10:04
As others have reported, if you purchase from Thomann, you have the option of returning it if it doesn't work.
14-Aug-2016, 10:40
Yes, that's what I was intending to do.
Melco N1A - Devialet 440 Pro - B&W 802 D3
(13-Aug-2016, 15:26)Axel Wrote: I've just ordered a Mutec MC-3+USB, directly from Mutec in Berlin, which should be with me by next weekend. Really looking forward to connecting my QNAP NAS and Oppo BDP 105D to it. I'm also going to order a DH Labs D110 AES/EBU cable to connect the Mutec and Le400. Anybody? Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
14-Aug-2016, 11:54
My Mutec has been on for a few hours, it is a little warm to the touch, but only a little, it's a long way off being hot.
1000 Pro - KEF Blade - iFi Zen Stream - Mutec REF10 - MC3+USB - Pro-Ject Signature 12
14-Aug-2016, 16:41
(14-Aug-2016, 11:54)Confused Wrote: My Mutec has been on for a few hours, it is a little warm to the touch, but only a little, it's a long way off being hot. Thanks, confused. No need to leave lots of space above in the rack then. Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
I've just hooked up my new MC-3+USB between my NAS and Devialet (USB in and AES/EBU out), and while I'm noticing SQ improvements, I'm not sure that I'm using it to its best effect. Does everybody else use reclocking mode? I have the clock multipliers set to 1. Am I using the unit correctly? Is anybody using an Intona with the Mutec or does the Mutec make the Intona redundant? Can anybody who has had a Mutec in their system explain the best settings to use, preferably with some photo's, please?
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
Axel - I am assuming your Mutec has shipped with the new V1.10 firmware. (I know teddlesdee's Mutec had the latest firmware, and his was shipped a couple of weeks ago) You have to select 'Intern' and 'Re-clk' plus the USB input as the 'Reference' (second column of lead's). Explaining how exactly is more difficult than actually doing it. There's only two selection /input buttons on the device and pressing them will show you what they do. The first column of lights shows a green light on 'Intern' and 're-clock'. The next column of lights should be green spanning one or both of the USB-PCM / USB-DSD. On the latest firmware the top three lights glow with a PCM input. (only two green LED on the previous firmware if I recall correctly) The next column 'clock out', all light blank. The 'clock multipliers' should all be top row 'x1'. You should then have the blue 'lock' light and the red 'Audio' light. I would post a picture, but I'm miles away from my Mutec at the moment!
1000 Pro - KEF Blade - iFi Zen Stream - Mutec REF10 - MC3+USB - Pro-Ject Signature 12
(24-Aug-2016, 07:54)Confused Wrote: Axel - I am assuming your Mutec has shipped with the new V1.10 firmware. (I know teddlesdee's Mutec had the latest firmware, and his was shipped a couple of weeks ago) You have to select 'Intern' and 'Re-clk' plus the USB input as the 'Reference' (second column of lead's). Explaining how exactly is more difficult than actually doing it. There's only two selection /input buttons on the device and pressing them will show you what they do. The first column of lights shows a green light on 'Intern' and 're-clock'. The next column of lights should be green spanning one or both of the USB-PCM / USB-DSD. On the latest firmware the top three lights glow with a PCM input. (only two green LED on the previous firmware if I recall correctly) The next column 'clock out', all light blank. The 'clock multipliers' should all be top row 'x1'. You should then have the blue 'lock' light and the red 'Audio' light. I would post a picture, but I'm miles away from my Mutec at the moment! Thanks Confused. I bought my Mutec direct from the factory, thus the new firmware was loaded. I have been using it exactly as you say, so I'm happy. I think this makes the Intona redundant from what I've read. Did you notice any improvement in SQ after a run in period? Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
|
« Next Oldest | Next Newest »
|