Posts: 4,303
Threads: 129
Joined: Jun 2014
Reputation:
174
I had the same error message once. (after I had been messing arround with new settings / connections / configurator)
Devialet solution to fix is......
Unplug the amp for five minutes, then turn on again.
The error messages self delete in a few days anyway.
Posts: 4,303
Threads: 129
Joined: Jun 2014
Reputation:
174
26-Nov-2014, 23:36
(This post was last modified: 27-Nov-2014, 09:37 by Confused.)
I managed to get an answer (Eventually)
"Sometimes, when the Device startups, it is not able to verify some elements of the startup.
That error message simply that the unit works properly but it did not succeed in verifying all components. It is related to the software, so nothing to worry about. It is a rare error message."
All clear? Well, almost?
Posts: 132
Threads: 5
Joined: Aug 2014
Reputation:
0
Got Under voltage error tonight.
Some one figured out what cause such error?
Devialet 800| B&W 802 Diamond | JL 113 | Linn Akurate DS + Denon HEOS for Spotify | Stealth Reverie speaker cables| Audioprana AES/RCA | DH LABS PC
Posts: 698
Threads: 14
Joined: Sep 2014
Reputation:
57
02-Jun-2015, 01:06
(This post was last modified: 02-Jun-2015, 02:38 by Damon.)
Is it possible that you are in an area where 'brown-outs' occur? Times when the voltage drops due to some upstream supply issue? We have pretty solid power where I am, but some parts of NA get voltages at the wall around 90 volts, down from 120; you may be getting 190 rather than 220.
As voltage drops can harm things with electrical demand (mostly electric motors, I think) it may be that the Devialet notices this and stores the info a fault. Also, just a thought that the language translations sometimes amuse, or confuse, with Devialet advertising and communications. 'Under Voltage' may mean 'Below normal voltage'.
Damon
Powernode, NAD M32, Cambridge CD transport, Analysis Plus, Nordost, iFi Nova, CSS Criton 1TDX, KEF C62
Vancouver, Canada
Posts: 214
Threads: 9
Joined: Feb 2015
Reputation:
1
02-Jun-2015, 01:45
(This post was last modified: 02-Jun-2015, 11:17 by ledesc.)
Hi Guys,
I had also the same fault some days ago, with the 7.1.3 if I remember well.
Just once, the support gave me the same answer.....
It never came back for the moment, I'm running 8.0.0 now.
B&W 805d - Athom Zef Max - Devialet D200 - AIR Ethernet - Roon ROCK (NUC8i3BEH + LPSU100) - Qobuz
- FR -
Posts: 568
Threads: 4
Joined: Sep 2014
Reputation:
9
As someone who works in IT you must always remember the notice on the outside of the IT department door.
"HAVE YOU TRIED TURNING IT OFF AND BACK ON AGAIN"
UK kit - Technics SP10 - Technics EPA-501 - AT33SA - NUC5i3 - W10 - Roonserver - Roon AIR - Devialet 1000 Pro CI - Blue Jeans Speaker Cable (0.5 metre each side) - Magico S5
Spain kit - NUC7i5 - W10 - Roonserver - Roon AIR - Devialet D250 Pro CI - Blue Jeans Speaker Cable - Ergo IX speakers
Posts: 346
Threads: 34
Joined: May 2014
Reputation:
5
Tonight I had Last Fault report
P4 MAINS QUALITY DROP
Anybody had the same report?