Posts: 45
Threads: 7
Joined: Jun 2014
Reputation:
2
Does anybody drive any of the physical digital inputs at > 88.2. I am playing around with my Chord Blu which can output at 44.1, 88.2 and 176.4. The 44 and 88 rates are correctly shown on the Devialet display but the 176 shows at just 88. Thanks in advance...
Chord Blu > D200 > Martin Logan Ethos : Saddleworth, England
Posts: 4,303
Threads: 129
Joined: Jun 2014
Reputation:
174
I have a Blu ray player, that will also play SACD via PCM. This is connected to the Devialet via SPDIF and will run to 192 khz per the Devialet's display.
Posts: 45
Threads: 7
Joined: Jun 2014
Reputation:
2
F1... thanks for the reply... I understand about the dual output... I used to have the dac64 which needed the two cables... also understand that I will only get a single channel at a time... I am just experimenting... I do get only left or right depending on which output from the Blu I plug the cable into but would still have expected the higher sampling i.e. 176 to show. Perhaps the Blue is 'aware' that both outputs are not connected and refuses to go past 88?
Chord Blu > D200 > Martin Logan Ethos : Saddleworth, England