18-Jan-2016, 09:35
If I understand things correctly the Dialog checks the connection between itself and the Phantoms. Whether it does this only once or periodically I don't know. The software then chooses the best link to use, wireless, ethernet or via the mains cable and uses it.
I was told one problem with an early test bit of software was that it tested the 3 then chose the worst, this error apparently took some time to find. I don't know whether this error ever made it into a released firmware...
I have 3 Phantoms, two are in the same room as the Dialog, about 1m and 5m from it and these definitely work poorly unless plugged into an unfilteted outlet, though they are plugged into different wall sockets they work fine now.
I bought a third which we play in different rooms. It works fine too even when plugged into a socket on a different ring-main to the Dialog and out of wifi range.
I was told one problem with an early test bit of software was that it tested the 3 then chose the worst, this error apparently took some time to find. I don't know whether this error ever made it into a released firmware...
I have 3 Phantoms, two are in the same room as the Dialog, about 1m and 5m from it and these definitely work poorly unless plugged into an unfilteted outlet, though they are plugged into different wall sockets they work fine now.
I bought a third which we play in different rooms. It works fine too even when plugged into a socket on a different ring-main to the Dialog and out of wifi range.
Devialet Original d'Atelier 44 Core, Job Pre/225, Goldmund PH2, Goldmund Reference/T3f /Ortofon A90, Goldmund Mimesis 36+ & Chord Blu, iMac/Air, Lynx Theta, Tune Audio Anima, Goldmund Epilog 1&2, REL Studio. Dialog, Silver Phantoms, Branch stands, copper cables (mainly).
Oxfordshire
