18-Apr-2018, 11:32
@whatmore the config files have a CRC value that the amp reads. Changing a file in an editor changes the checksum so the amp will reject the file.
I agree that convolution belongs in the amp. Especially now that there is an embedded Linux computer in there. I am not sure if SAM still runs on the "old" DSP. I would guess it is...
@Pim if you know what you are doing this is not dangerous. Maxime Dumont from Devialet (one of the travelling SAMLab operators) said that using the 'wrong' profile from a similar speaker should not be a problem. I used the Atohm GT1 profile with my Monitor Audios for many years until I got them SAMed last year. Of course using a profile for a 12" woofer with full bass boost on a LS3/5A is not good.
I agree that convolution belongs in the amp. Especially now that there is an embedded Linux computer in there. I am not sure if SAM still runs on the "old" DSP. I would guess it is...
@Pim if you know what you are doing this is not dangerous. Maxime Dumont from Devialet (one of the travelling SAMLab operators) said that using the 'wrong' profile from a similar speaker should not be a problem. I used the Atohm GT1 profile with my Monitor Audios for many years until I got them SAMed last year. Of course using a profile for a 12" woofer with full bass boost on a LS3/5A is not good.
*
Devialetless!
Roon, ROCK/Audiolense XO/Music on NAS/EtherRegen/RoPieee/USPCB/ISORegen/USPCB/Sound Devices USBPre2/Tannoy GOLD 8
250 Pro CI, MicroRendu(1.4), Mutec MC-3+USB
Devialetless!
Roon, ROCK/Audiolense XO/Music on NAS/EtherRegen/RoPieee/USPCB/ISORegen/USPCB/Sound Devices USBPre2/Tannoy GOLD 8
250 Pro CI, MicroRendu(1.4), Mutec MC-3+USB