25-Apr-2015, 11:17
i was under the impression that the volume from the AV receiver would have no bearing on the line level outputs for the speakers.
turns out i was wrong! i have my AV receivers set to be really low volume at startup regardless of what volume it was turned off at.
to be at a decent audible level the amps were around the +15 db volume mark and higher.
i believe this caused the issues in the devialet because now that i have the AV receiver set to full volume and the volume on the devialets in the negative range the issue appears to have disappeared!
turns out i was wrong! i have my AV receivers set to be really low volume at startup regardless of what volume it was turned off at.
to be at a decent audible level the amps were around the +15 db volume mark and higher.
i believe this caused the issues in the devialet because now that i have the AV receiver set to full volume and the volume on the devialets in the negative range the issue appears to have disappeared!
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)