17-Jun-2015, 00:01
So i thought i would update this to show my computer upgrades:
I went from standard computer chassis and did the following:
upgraded the control pc from standard motherboard to serverboard supermicro with xeon and 32gb ram
both chassis are streacom fc10 with heat pipe riser kits
each pc is powered by 2 linear power supplies:
1 x 100 watt 12v R-core teradak lpsu for the cpu
1 x 200 watt 12v teradak lpsu for the motherboard
200 watt 12v pico psu in each.
the ppa usb v3 card is still powered by the teddy pardo lpsu.
for the mean time ive still got standard cabling to each ssd etc installed but i took steps for the meantime:
I bought aluminium tape and completely wrapped each cable for shielding, and then wrapped that up with electrical tape!
I went from standard computer chassis and did the following:
upgraded the control pc from standard motherboard to serverboard supermicro with xeon and 32gb ram
both chassis are streacom fc10 with heat pipe riser kits
each pc is powered by 2 linear power supplies:
1 x 100 watt 12v R-core teradak lpsu for the cpu
1 x 200 watt 12v teradak lpsu for the motherboard
200 watt 12v pico psu in each.
the ppa usb v3 card is still powered by the teddy pardo lpsu.
for the mean time ive still got standard cabling to each ssd etc installed but i took steps for the meantime:
I bought aluminium tape and completely wrapped each cable for shielding, and then wrapped that up with electrical tape!
Amp - Devialet 400 Speakers - vivid audio B1 Speaker cable - audioquest oak Power conditioner - furman SPR 16IE Source - audio PC with paul pang audio usb card v3 and paul pang red dual usb cable running through jplay. usb card powered by teddy pardo power supply Source 2 - line in from integra AV receiver (TV)
