Hiss on Phono

[theaudioguru]

Yes. Adjust the max level setting. Try playing the loudest part of your loudest LP and see what the meters show. They are pretty tiny though...
I would start with about half of the rated 0dB output of your cartridge since at middle frequencies greater than 0dB levels can be recorded.

Thanks f1eng, just to add to the knowledge base, this was the advice I received form the SUT manufacturer,

Ortofon Cadenza Bronze (0.4mV, 5 ohms): Use the HI setting (1:20) for an 7.3mV output level - perfect for the Devialet preamp set to standard MM settings. Loading, linearity, SNR, and frequency response looks great

I redid my config on the sd cards to make sure that there wasn't an error, I'm using my slave as a MM input, 4mv as my max level, things are much improved.
I'll report back on my experience,
thanks,
theaudioguru