27-May-2017, 04:18
OK, the version of this I got from Devialet support (to enter a rescue mode for Dialog) was:
Plug in ethernet cable, and ideally, use a switched power strip to plug in the Dialog.
Turn off power at strip.
Turn off for 3 seconds, then on for 4. Repeat cycle 4 times and see if you get a flashing white light (meaning Dialog is downloading new software).
Anyway, it didn't work for my Dialog and I just received a replacement from customer service. Apart from the box and cords, the Dialog itself looks refurbished, as the white casing is bent upwards where it receives the heat (you can see pictures elsewhere on the board).
Plug in ethernet cable, and ideally, use a switched power strip to plug in the Dialog.
Turn off power at strip.
Turn off for 3 seconds, then on for 4. Repeat cycle 4 times and see if you get a flashing white light (meaning Dialog is downloading new software).
Anyway, it didn't work for my Dialog and I just received a replacement from customer service. Apart from the box and cords, the Dialog itself looks refurbished, as the white casing is bent upwards where it receives the heat (you can see pictures elsewhere on the board).
--
Stereo Devialet Silver Phantoms via Dialog.
Stereo Devialet Silver Phantoms via Dialog.
