Adding second d200

[baddog]

You should be fine. Just keep volume low at first.

For now just connect with the RCA - RCA coax cable between the two units if that is what you have.

Take the time to review the configuration options, set one as master, one as slave. You can choose which unit is LEFT and which is RIGHT for speakers.

Authorize one remote to control the units.

I don't know how many and what type of inputs you will want into the Devialet, but if it is such that they can all plug into master then you do not need the "link" cable.

You will download a configuration for the master and slave units to an SD card. One for each. You need to be sure to download separately the configuration for master, save to SD card, and then download configuration for slave.

Then with the Devialets off, insert the proper SD card into each. I would recommend turning on the master first and let it load. The turn on the slave and let it load.

The Devialet display will indicate with is master and slave.

Take your time on connecting the speakers properly to each.

Beat of luck! Let us know how you fair.