17-Jul-2016, 21:10
(17-Jul-2016, 17:16)Rufus McDufus Wrote: Speaker placement and floor surface is quite critical with the C-1.1 and presumably the 2.1 as they share the same kind of energy-dissipating feet. They like a hard surface (but wooden floorboards can be a bit problematic), and the recommended placing (particularly for the fantastic Raidho imaging) can be a bit odd, i.e. close to the side walls and well away from the rear wall. Again not sure if the 2.1 is the same. Unfortunately I've never been able to place mine correctly due to a small room which is not just a hi-fi room, but I'm still very pleased with the sound and I've rarely heard better.
I guess my friends room is too big (30 m2) and also too lively for these speakers. A smaller well damped room would most likely suit them better
Highly modded avantgarde omega duos, slightly modded d200, d-sonics m3 800 s class d amp to drive the subs of my duos, all equipment on silent running audio platforms.
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
