24-Sep-2016, 22:41
I think the Plc you are using on the dialog will be the issue. It will be interfering with the internal Plc used by the dialog and phantoms. I believe that the phantoms/dialogs try to connect on Plc first then drop to wifi if Plc is unstable. Your own Plc unit will be interfering with this process.
If your dialog is too far away from your router to connect via Ethernet, try an Apple Airport Express in wifi client mode. I have this setup and has worked flawlessly.
If your dialog is too far away from your router to connect via Ethernet, try an Apple Airport Express in wifi client mode. I have this setup and has worked flawlessly.
