27-Dec-2016, 09:40
Have some experience with time alignment. My Duos in stock form are very bad in that regards. Tweeter is way ahead of midrange and bass around 2ms behind the mids. Built some
wooded blocks which I have put on the woofer and put the tweeter on top. This allows me to move tweeter back in small increments. Once properly aligned the large Duos image almost like mini monitors and through a very wide and deep sounstage. Have demoed this to some of my audio buddies. Played some music in aligned position, hit pause, moved tweeter back in its original position and hit play. takes people less than 5 seconds until they say moved them back. Difference is VERY obvious!
Bass similarily important. Often heard comments by people who listened to some a antagardes and noticed bass is lacking behind. They heard the 2ms delay!
Wilson Audio is one of the very few companies who understand the importance of time alignment. No clue why other manufacturers are so ignorant in that regard.
wooded blocks which I have put on the woofer and put the tweeter on top. This allows me to move tweeter back in small increments. Once properly aligned the large Duos image almost like mini monitors and through a very wide and deep sounstage. Have demoed this to some of my audio buddies. Played some music in aligned position, hit pause, moved tweeter back in its original position and hit play. takes people less than 5 seconds until they say moved them back. Difference is VERY obvious!
Bass similarily important. Often heard comments by people who listened to some a antagardes and noticed bass is lacking behind. They heard the 2ms delay!
Wilson Audio is one of the very few companies who understand the importance of time alignment. No clue why other manufacturers are so ignorant in that regard.
Highly modded avantgarde omega duos, slightly modded d200, d-sonics m3 800 s class d amp to drive the subs of my duos, all equipment on silent running audio platforms.
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
DCS Network bridge connected with AQ diamond to Router and with special Belden 1694a digital cable (cable is cryoed, mechanical damped and using very high quality solder to KLEI Harmony Bullet plug)
S/C is Shunyata biwire Delta, 2 Delta p/c on the bridge and bass amp, Synergestic dev p/c on the 200, all connected to Shunyata Denali power conditioner
