K
Here’s another thread about the Dynavector:https://devialetchat.com/showthread.php?tid=1516
(05-Dec-2017, 04:47)rbsound Wrote: Borrowed a Sutherland Insight phono stage between the 2M Black and the 250 Pro - what a difference; like someone removed a blanket that was draped over the speakers.I see that the output from the Dynavector MC is only 0.28mV. Others here have had trouble with outputs lower than 0.5mV. You might need to use a step up transformer.
Figuring out my next move. I think I may try to upgrade the 2M Black to a DV XX2-Mk2 MC. My thinking is that this should significantly upgrade my sound from what I've heard, and perhaps, the Devialet phono stage will work well in MC mode despite the problems I'm having with the MM mode. If I still need a phono stage to get the most out of my turntable so be it, but for the about the same money it would take to get the 2M sounding good via an external phono stage, I could upgrade the cartridge.
Thoughts?
Here’s another thread about the Dynavector:https://devialetchat.com/showthread.php?tid=1516
Project Eperience X Pack with Ortofon Rondo Red MC, Oppo BDP 105D, 2 x Sonos Connect, QNAP HS251+ NAS with 2 X 6TB Western Digital Red, Mac 5K 32GB running Lifetime Roon, iPad Pro 12.9" for remote control. Etalon Ethernet Isolator, Devialet 440 Pro CI, Sonus faber Olympica ll with Isoacoustics Gaia ll feet, Auralic Taurus Mkll headphone amp., Denon AH-D5000, Sennheiser HD600 and HD800 with Cardas cable, Van Den Hul The First Ultimate and Crystal interconnects, Furutech power cables, GSP Audio Spatia speaker cable.
South Coast England
