23-Apr-2018, 10:01
Roberto,
I have a Krystal/LP12 and it should not sound like that into your DV. Given that you have already used a separate phono stage then you know that the cartridge is fine, so there can only be a problem with the configuration file. Until Devialet provide us with a proper working configurator post CI upgrade then it can sometimes be a bit 'hit and miss' getting a working config file.
I suggest starting your configuration from scratch using a 'clean' SD card ( ie wiped and reformatted) - I use 0.25mV and 100 ohms and 0pF as a starting point for the phono - make sure that you select RIAA 1976 - and also set one of the remote buttons for RAM.That way you can make small adjustments to the cartridge settings 'on the fly' to see if that will solve your problem.
Good Luck.
I have a Krystal/LP12 and it should not sound like that into your DV. Given that you have already used a separate phono stage then you know that the cartridge is fine, so there can only be a problem with the configuration file. Until Devialet provide us with a proper working configurator post CI upgrade then it can sometimes be a bit 'hit and miss' getting a working config file.
I suggest starting your configuration from scratch using a 'clean' SD card ( ie wiped and reformatted) - I use 0.25mV and 100 ohms and 0pF as a starting point for the phono - make sure that you select RIAA 1976 - and also set one of the remote buttons for RAM.That way you can make small adjustments to the cartridge settings 'on the fly' to see if that will solve your problem.
Good Luck.
