30-Oct-2020, 01:06
So, back to subs and a Dev 1000. I have set the configurator to speakers full range when preout is disabled. Otherwise I have the speakers running from 80Hz on up and the subs running up to 80Hz - all set in the configurator. Seems straight forward enough.
But, once it is all up and running I still have the option to set the subs’s gain and crossover (on the sub) - since I already ‘capped’ the sub at 80Hz in the Dev but the subs controls go higher - what does that mean at this point? If I go to the max doe that mean it caps at 80Hz?
I am fiddling with it but am wondering what others have found going down this path...
Thanks
But, once it is all up and running I still have the option to set the subs’s gain and crossover (on the sub) - since I already ‘capped’ the sub at 80Hz in the Dev but the subs controls go higher - what does that mean at this point? If I go to the max doe that mean it caps at 80Hz?
I am fiddling with it but am wondering what others have found going down this path...
Thanks
Nucklehead AMD Server - Devialet 1000Pro - Magico S3 Speakers
New England
USA